Job description of an engineer for technological preparation of production. Production preparation engineer job description. Qualification requirements for an engineer of category I

25.04.2020

APPROVE
Supervisor ________________________
______________________ (____________)

JOB DESCRIPTION
pre-production engineer
1. GENERAL PROVISIONS
1.1. This job description defines the functional duties, rights and responsibilities of the pre-production engineer (hereinafter referred to as the "engineer") ______________ (hereinafter referred to as the "Company").
1.2. The engineer is appointed to the position and dismissed from the position in accordance with the procedure established by the current labor legislation by order of the head of the Company.
1.3. The engineer reports directly to ______________ Society.
1.4. A person is appointed to the position of an engineer who has:
Category I pre-production engineer: higher professional (technical or engineering and economic) education and work experience as a category II pre-production engineer for at least 3 years.
Category II production preparation engineer: higher professional (technical or engineering and economic) education and work experience as a production preparation engineer or other engineering and technical positions filled by specialists with higher vocational education, not less than 3 years.
Production preparation engineer: higher professional (technical or engineering and economic) education without presenting requirements for work experience or secondary vocational (technical or engineering and economic) education and at least 3 years of work experience as a technician of category I for at least 3 years or other positions filled by specialists with secondary vocational education, not less than 5 years.
1.5. The engineer must know:
- resolutions, orders, orders, methodological and regulatory materials on production planning at the enterprise; the procedure for developing production programs and shift-daily tasks; the production capacity of the enterprise, the range of products, types of work (services) performed; organization of production; fundamentals of production technology of the enterprise; organization of accounting for the progress of production; specialization of shops, sections, industrial relations between them; means of organizing and mechanizing the dispatching service; fundamentals of economics, organization of labor and management; basics labor law; labor protection rules and regulations.
1.6. During the period of temporary absence of an engineer, his duties are assigned to _____________________.
2. FUNCTIONAL RESPONSIBILITIES
The engineer has the following responsibilities:
Carries out preparation of production using computer technology, communications and communications, control over the provision of production with components, materials, tools, timeliness of execution of all necessary technical documentation, develops monthly production programs and shift-daily tasks for a fixed area of work.
Participates in the development and implementation of standards for operational planning of production.
Controls the completeness of work in progress, compliance with the established norms of backlogs and calendar advances in the work of production units.
Calculates calendar schedules for loading equipment, taking into account more efficient use of production capacities, monitors their implementation.
Analyzes the work of shops and sections, seeks ways to reduce the cycle of manufacturing products, performing work (services), identifies production reserves, develops proposals for their use.
Controls the implementation of the production plan and takes measures to ensure rhythmic work, prevent and eliminate violations of the course production process, efficient use of equipment, creation of favorable conditions for labor collectives for the implementation of the production program.
Maintains established reports.
3. RIGHTS
The engineer has the right:
3.1. Request and receive the necessary materials and documents related to the activities of an engineer.
3.2. Engage in relationships with departments of third-party institutions and organizations to resolve operational issues production activities within the scope of the engineer.
3.3. Represent the interests of the enterprise in third-party organizations on issues related to its professional activities.
4. RESPONSIBILITY
The engineer is responsible for:
4.1. Failure to fulfill their functional duties.
4.2. Inaccurate information about the status of the work.
4.3. Failure to comply with orders, orders and instructions of the head of the Company.
4.4. Failure to take measures to suppress the identified violations of safety regulations, fire and other rules that pose a threat to the activities of the enterprise and its employees.
4.5. Failure to comply with labor discipline.
5. WORKING CONDITIONS
5.1. The engineer's work schedule is determined in accordance with the Internal Labor Regulations established by the Company.
5.2. In connection with the production need, the engineer is obliged to go on business trips (including local ones).
6. RIGHT OF SIGNATURE
6.1. To ensure his activities, the engineer is given the right to sign organizational and administrative documents on issues included in his functional responsibilities.

Familiarized with the instruction ___________________/_________________/
(signature)

I. General provisions

The pre-production engineer reports directly to _______.
The pre-production engineer follows the instructions of _______.
The pre-production engineer replaces _______.
The pre-production engineer is replaced by _______.
Must know:

resolutions, orders, orders, methodological and regulatory materials on issues of production planning at the enterprise;
the procedure for developing production programs and shift-daily tasks;
the production capacity of the enterprise, the range of products, types of work (services) performed;
organization of production;
fundamentals of production technology of the enterprise;
organization of accounting for the progress of production;
specialization of shops, sections, production links between them;
means of organizing and mechanizing the dispatching service;
fundamentals of economics, organization of labor and management;
fundamentals of labor law.

Qualifications:

Leading pre-production engineer: higher professional (technical). Work experience in the profession of an engineer in the preparation of production of category I - at least 2 years.
Production preparation engineer of the 1st category: higher professional (technical); for a master - without requirements for work experience, a specialist - at least 2 years of work experience in the profession of an engineer in the preparation of production of the II category - at least 2 years.
Engineer for preparation of production II category: higher professional (technical). At least 1 year of work experience as a production engineer.
Pre-production engineer: higher professional (technical) education without presenting requirements for work experience.

II. Job Responsibilities

Pre-Production Engineer:

Carries out with the use of computer technology, communications and communications the preparation of production, control over the provision of production with components, materials, tools, timely execution of the necessary technical documentation; develops monthly production programs and shift-daily tasks for a fixed area of work.
Participates in the development and implementation of standards for operational planning of production.
Controls the completeness of work in progress, compliance with the established norms of backlogs and calendar advances in the work of production units.
Calculation of calendar schedules for equipment loading, taking into account more efficient use of production capacities, monitors their implementation.
Analyzes the work of shops and sections, seeks opportunities to reduce the cycle of manufacturing products, works (services), identifies production reserves, develops proposals for their use.
Controls the implementation of the production plan and takes measures to ensure smooth operation, prevent and eliminate violations of the production process, efficient use of equipment, and create favorable conditions labor collectives to carry out the production program.

III. Rights

The pre-production engineer has the right to:

give assignments to subordinate employees, tasks on a range of issues included in his functional duties;
control the execution production tasks, timely execution of individual assignments by employees subordinate to him;
to request and receive the necessary materials and documents related to the issues of their activities and activities of employees subordinate to him;
interact with other services of the enterprise on production and other issues that are part of its functional duties;
get acquainted with the draft decisions of the company's management regarding the activities of the Division;
propose for consideration by the manager proposals for improving the work related to the duties provided for in this Job Description;
submit for consideration by the head of the proposal on the promotion of distinguished employees, the imposition of penalties on violators of production and labor discipline;
report to the manager on all identified violations and shortcomings in connection with the work performed.

IV. A responsibility

The production engineer is responsible

For improper performance or non-performance of their official duties, as well as for non-use or directly to one's own rights provided for by this Job Description - to the extent determined by the current legislation of Ukraine.
For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of Ukraine.
For causing material damage - within the limits determined by the current labor legislation on labor of Ukraine.

I. GENERAL PROVISIONS

1. The pre-production engineer belongs to the category of specialists.

2. Appointment to the position of an Engineer for the preparation of production and dismissal from it is carried out by order CEO organizations.

3. Qualification requirements.

Category I pre-production engineer: higher professional (technical or engineering and economic) education and work experience as a category II pre-production engineer for at least 3 years.

Category II pre-production engineer: higher professional (technical or engineering and economic) education and work experience as a pre-production engineer or other engineering and technical positions filled by specialists with higher professional education, at least 3 years.

Production preparation engineer: higher professional (technical or engineering and economic) education without presenting requirements for work experience or secondary vocational (technical or engineering and economic) education and at least 3 years of work experience as a technician of category I for at least 3 years or other positions filled by specialists with secondary vocational education, not less than 5 years.

4. The pre-production engineer must know:

- resolutions, orders, orders, methodological and regulatory materials on production planning at the enterprise

– the procedure for developing production programs and shift-daily tasks

production capacities of the enterprise, the range of products, types of work (services) performed

- organization of production

basics of production technology of the enterprise

– organization of accounting for the progress of production

specialization of shops, sections, production links between them

- means of organizing and mechanizing the dispatching service

— fundamentals of economics, labor organization and management

— fundamentals of labor law

- Rules and norms of labor protection.

II. JOB DUTIES

Pre-Production Engineer:

1. Carries out preparation of production using computer technology, communications and communications, control over the provision of production with components, materials, tools, timeliness of execution of all necessary technical documentation, develops monthly production programs and shift-daily tasks for the assigned area of work.

2. Participates in the development and implementation of standards for operational planning of production.

3. Controls the completeness of work in progress, compliance with the established norms of backlogs and calendar advances in the work of production units.

4. Calculates calendar schedules for loading equipment, taking into account more efficient use of production capacities, monitors their implementation.

5. Analyzes the work of shops and sections, seeks opportunities to reduce the cycle of manufacturing products, performing work (services), identifying production reserves, developing proposals for their use.

6. Controls the implementation of the production plan and takes measures to ensure rhythmic work, prevent and eliminate violations of the production process, efficient use of equipment, and create favorable conditions for labor collectives to fulfill the production program.

7. Maintains established reporting.

III. RIGHTS:

The pre-production engineer has the right to:

1. Get acquainted with the draft decisions of the organization's management regarding its activities.

2. Submit proposals for the management to improve the work related to the responsibilities provided for in this instruction.

3. Within the limits of its competence, report directly to the head of all the shortcomings identified in the course of activities and make proposals for their elimination.

4. Request personally or on behalf of the management of the organization the documents necessary for the performance of his duties.

5. Require the head of the organization to assist in the performance of his duties and rights.

IV. A RESPONSIBILITY:

The production engineer is responsible for:

1. For improper performance or non-performance of their official duties provided for by this job description - within the limits determined by the current labor legislation Russian Federation.

2. For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of the Russian Federation.

3. For causing material damage - within the limits determined by the current labor and civil legislation of the Russian Federation.

Specialists who have received a higher engineering and economic or technical education are experiencing more and more difficulties in finding employment. At the same time, the labor market is overflowing with proposals for in-demand jobs. technical specialties unpopular with engineers. Production preparation is one of the similar areas that need more attention from job seekers.

Prospects and pay

A pre-production engineer is a promising position that requires great personal responsibility, attentiveness and impeccable professional skills.

High requirements compensated by decent working conditions, career prospects and stable salary: even a novice specialist can count on 20,000-45,000 rubles per month.

What does a pre-production engineer do?

Responsible work implies a long list of job responsibilities. The effectiveness of the measures he develops depends on how well a professional understands the specifics of each stage of the work cycle.

The lead pre-production engineer manages the following segments of the workflow organization:

Timely provision of machinery, equipment, components in sufficient quantities. The specialist calculates the quantity of materials, sends documentation with data for bulk purchase, monitors the remaining number of tools and replaces technical units in case of premature failure.
Development and introduction of labor standards. Pre-production engineer prepares best options solutions production tasks; introduces standards to improve production efficiency.
Compliance with production standards. The specialist is responsible for the timely implementation of the calculated standards. Not only minimum norms are taken into account, but also prepared schedules of calendar advances.
Development of the most efficient loading cycles for production equipment. Both performance indicators and natural wear parameters of machines are taken into account. The duty of the lead engineer is to calculate the cycles that will allow you to get the maximum without premature wear of the equipment.

Secondary tasks of the position

For consists in listing the factors of responsibility that the specialist must control at the initial stages of the implementation of the production program. Main responsibilities also include:

Analysis of the labor activity of subordinate shops and labor sites. Optimization of production cycles, reduction of human and mechanical labor spent on production.
Search and activation of production reserves. Identification of labor opportunities and capacities not involved in the main production cycle.
Communication between management and workers. Organization of a smooth, rhythmic work process with maximum efficiency, without delays and delays. Prevention of violations of the schedule of any kind, creation of an environment and conditions for effective production cycle.
Reporting. Drawing up reports on the effectiveness of the team, the use of equipment, the results of the introduction of changes in the production cycle. Since the reports of the pre-production engineer involve large amounts of data, computer tools and special tools are often used for reporting. software. The form of the report is established by management.

The specialist involved in the preparation of production affects the efficiency of all production activities in the organization.

The responsibilities of a pre-production engineer are varied, but this job offers more opportunities for personal and career growth.

Qualification requirements for an engineer of category I

The position requires highly specialized training. Only candidates who meet the following requirements should submit a resume for the specialty:

Work experience: production preparation engineer of the 2nd category, from 3 years.

High competition hinders the rapid search for work in this profile. Most effective method- "vertical lift": promotion from category II without changing the company-employer.

Qualification requirements for an engineer of the II category

Entrance to the profession is open to specialists with specialized education and professional experience at least 3 years. An applicant counting on the II category must meet the following requirements:

Higher professional education: engineer-economist.
Alternative option: higher professional technical education.
Work experience: production preparation engineer, from 3 years.
Alternative work experience: related engineering and technical positions for specialists with higher technical (engineering and economic) education, from 3 years.

If you have experience in responsible positions that require appropriate qualifications, then you have the right to apply for category II.

Qualification Requirements

A specialist applying for the position of an engineer without a category is not required to meet the same strict requirements for seniority. For pre-production engineers, the ETKS is presented with two options for the positions for the applicant.

Requirements for persons with higher professional education:

Higher technical education.
Higher engineering and economic education.
Seniority: not required. University graduates without work experience are accepted.

Requirements for persons with secondary vocational education:

Secondary technical education.
Secondary engineering and economic education.
Work experience: technician of the 1st category, from 3 years.
Alternative experience: work in the specialty, from 5 years.

What a specialist should know

The production preparation engineer's manual contains all the basic information that a specialist should be able to navigate freely.

The list of materials required for study and development includes:

Methodological instructions and normative materials that establish the priority of production planning.
Reference materials on the organization of the working cycle.
Resolutions and orders of management that affect the duration and standards of the production cycle.
The sequence of preparation of new programs and production cycles.
The sequence of drawing up tasks for daily shifts.
Projected and actual production capacities of the equipment.
Complete information about the products produced: nomenclature, variations, production specifics.
Full information about production work or services provided by businesses.
Basic information about the technology of manufacturing products and the mechanics of the production cycle.
Working relationships between workshops and production sites of various specializations, understanding the dynamics of labor relations in the production process.

Also in the field of mandatory knowledge of the pre-production engineer is the development of the means of organizing warning systems, dispatching services and communication devices. Uninterrupted communications ensure the timely execution of the production cycle.

General knowledge required for a specialist

The position allows you to use the skills and knowledge gained in the process of studying at higher educational institution. To be successful in production optimization, an engineer must be fluent in the following disciplines:

Fundamentals of the organization of labor processes.
Fundamentals of management.
Fundamentals of Economics.
Fundamentals of labor legislation of the Russian Federation.

A specialist has to combine daily theoretical knowledge in various areas of economics and management in order to achieve the best result on the existing equipment, with the current team. Also, a detailed knowledge of the established labor standards and labor protection rules is mandatory: production must be organized in accordance with the letter of the law.

Profession benefits

This specialty is suitable for people who are passionate about labor optimization. The pre-production engineer determines whether production capabilities used to the maximum. This is a position where there is no time to be bored. Strong specialists receive stable bonuses, become reputable professionals for management.

The speed of professional growth is directly related to personal initiative. The specialist independently develops proposals for improving the production cycle and sends them for discussion.

You can get a job in your specialty without specialized work experience, which makes the position attractive for graduates of specialized universities. It takes only 6 years to get category I.

EKSD 2018. Edition dated April 9, 2018
To search for approved professional standards of the Ministry of Labor of the Russian Federation, use reference book of professional standards

Pre-Production Technician

Job responsibilities. Participates in the provision of engineering preparation for production. Receives the necessary technical documentation, keeps a log of its registration, checks its completeness and the availability of the necessary approvals and approvals. Provides storage, accounting and transfer of technical documentation to departments of the organization. Prepares work logs with filling in details and transfers them to production sites. Takes part in the development of monthly production programs and shift-daily tasks for the assigned area of work, in drawing up calendar schedules equipment loading. Prepares bills of quantities in physical and cost terms, applications for materials, parts and structures, orders for the manufacture of products. Compares the actual consumption of materials with the standard. Takes part in the development of measures to improve the work of shops and sections, reduce the cycle of manufacturing products, perform work (services), develop proposals for the use of production reserves.

Must know: laws and other regulations legal acts Russian Federation, methodological and regulations to ensure engineering preparation of production, technology and organization of production, composition, procedure for drawing up technical documentation, procedure for developing projects for the production of work, the range of manufactured products, materials used, products and structures, requirements for secrecy, preservation of official, commercial and state secrets, non-disclosure of confidential information nature, the fundamentals of the economy and organization of labor, the fundamentals of labor legislation, the rules for labor protection and fire safety, internal labor regulations.

Qualification requirements.

Production preparation technician of category I: secondary vocational (technical) education and work experience as a production preparation technician of category II for at least 2 years.

Category II production preparation technician: secondary vocational (technical) education and work experience as a production preparation technician or in other positions filled by specialists with secondary vocational (technical) education, at least 2 years.

Production preparation technician: secondary vocational (technical) education without presenting requirements for work experience.

Jobs for the position of Technician for the preparation of production according to the all-Russian database of vacancies