We bring to your attention a typical example of a job description for an emergency repair worker, a sample of 2019. A person with primary or secondary vocational education, special training and work experience can be appointed to this position. Do not forget, each instruction of an emergency repair worker is issued on hand against receipt.
It provides typical information about the knowledge that a repair fitter should have. About duties, rights and responsibilities.
This material is included in the huge library of our site, which is updated daily.
1. General Provisions
1. An emergency repair fitter belongs to the category of workers.
2. A person with an average professional education or initial vocational education and special training and _______ years of work experience.
3. An emergency repair fitter is hired and dismissed by the director of the organization on the proposal of the head of production (section, workshop)
4. The emergency repair fitter must know:
a) special (professional) knowledge of the position:
- arrangement of drainage mechanisms and pneumatic tools;
- ways to eliminate malfunctions in the operation of mechanisms and pneumatic equipment;
- the frequency and rules for preventive maintenance of tools and fixtures;
b) general knowledge organization employee:
— rules and norms of labor protection, safety measures, industrial sanitation and fire protection,
- rules for the use of personal protective equipment;
- requirements for the quality of work (services) performed, for the rational organization of labor in the workplace;
- types of marriage and ways to prevent and eliminate it;
- production signaling.
5. In his activities, the emergency repair worker is guided by:
— Charter of the organization,
- orders and directives organization director,
- this job description,
— Rules of internal work schedule organizations,
— __________________________________________________.
6. The emergency repair fitter reports directly to a worker with a higher qualification, the head of production (section, shop) and the director of the organization.
7. During the absence of an emergency repair worker (business trip, vacation, illness, etc.), his duties are performed by a person appointed by the director of the organization on the proposal of the head of production (section, workshop) in the prescribed manner, who acquires the appropriate rights, duties and is responsible for the performance of his duties.
2. Responsibilities of an emergency repair worker
The duties of the locksmith of emergency repair work are:
a) Special (professional) duties:
– Performing work on the repair of water supply networks under the guidance of a more highly qualified locksmith: cleaning and removing blockages of sewer networks, excavating channels and pits and fixing them; caulking and sealing of joints, pouring and caulking with lead, sulfur alloy or cement pipe sockets.
- Performing simple plumbing repairs.
- Toe and lay pipes and fittings.
— Work on manual dewatering mechanisms and pneumatic tools.
b) General duties of an employee of the organization:
— Compliance with the Internal Labor Regulations and other local regulations of the organization,
— internal rules and norms of labor protection, safety measures, industrial sanitation and fire protection.
— Execution within employment contract orders of employees to which it is repaired in accordance with this instruction.
– Performing work on the acceptance and delivery of shifts, cleaning and washing, disinfection of serviced equipment and communications, cleaning the workplace, fixtures, tools, as well as keeping them in good condition;
- Maintenance of established technical documentation
3. Rights of an emergency repair worker
The emergency repair worker has the right to:
1. Submit proposals for management consideration:
– to improve the work related to the provisions of this responsibilities,
— on bringing to material and disciplinary responsibility employees who violated production and labor discipline.
2. Request from structural divisions and employees of the organization the information necessary for him to perform his duties.
3. Get acquainted with the documents that define his rights and obligations in his position, the criteria for assessing the quality of performance of official duties.
4. Get acquainted with the draft decisions of the organization's management regarding its activities.
5. Require the management of the organization to provide assistance, including the provision of organizational and technical conditions and the execution of established documents necessary for the performance of official duties.
6. Other rights established by the current labor law.
4. Responsibility of the emergency fitter
The emergency fitter is responsible for the following:
1. For improper performance or non-performance of their official duties provided for by this job description - within the limits established by the labor legislation of the Russian Federation.
2. For offenses committed in the course of their activities - within the limits established by the current administrative, criminal and civil legislation of the Russian Federation.
3. For causing material damage organizations - within the limits established by the current labor and civil legislation of the Russian Federation.
Job description locksmith of emergency and restoration works - sample of 2019. Job Responsibilities of an emergency repair fitter, rights of an emergency repair fitter, responsibility of an emergency repair fitter.
Locksmith of emergency and restoration works, 2nd category
Job Description.
1. Performing work on the repair of water supply networks under the guidance of a more highly qualified locksmith, cleaning and removing blockages of sewer networks, excavating channels and pits and fixing them; caulking and sealing of joints, pouring and caulking with lead, sulfur alloy or cement pipe sockets.
2. Performing simple locksmith repairs.
3. Toe and lay pipes and fittings.
4. Work on manual drainage mechanisms and pneumatic tools.
Must know:
Installation of drainage mechanisms and pneumatic tools;
- ways to eliminate malfunctions in the operation of mechanisms and pneumatic equipment;
- the frequency and rules of preventive maintenance of tools and fixtures.
Locksmith of emergency and restoration works, 3rd category
Job Description.
1. Performing work on the repair of water supply networks, caulking, pouring lead or sulfur alloy sockets of pipes of small diameters up to 300 mm.
2. Determination of malfunctions of water columns and fire hydrants on the network.
3. Heating of metering pipelines in various ways.
4. Turning on and off the inputs of networks of small diameters according to sketches and diagrams.
5. Manufacture of hydraulic testing of input of networks of small diameters.
6. Cutting pipes of all diameters with rollers, pipelines with a manual drive.
7. Caulking and pouring with lead and various substitutes for pipe mortars under the guidance of a more highly qualified locksmith.
8. Cleaning the sewer network by the hydraulic method, removing blockages in pipes with a flexible shaft to a depth of 7-8 m.
9. Preparation of inflatable balls, disks necessary specific gravity and winches with a lifting capacity of 0.5 tons.
10. Checking the suitability of the cable for work in waste water.
11. Extraction of sediment from the underlying wells.
12. Earthworks with the installation, driving and excavation of metal sheet piles manually or mechanized using water-reducing devices.
13. Installation of plastic pipelines, including socket connections with rubber rings.
Must know:
The device and principle of operation of valves, hydrants, standpipes, pipelines, manual hydraulic presses and pressure gauges;
- rules and methods for sealing sockets with lead and lead substitutes;
- methods for determining the presence of gas in wells;
- method of hydraulic testing;
- ways to eliminate damage to pipelines, fittings, as well as ways to eliminate water leaks;
- methods of chlorination of pipelines with chlorine and bleach;
- reading simple drawings, diagrams and sketches;
- Rules for preventive maintenance of tools and devices.
Locksmith of emergency repair work 4th category
Job Description.
1. Performance of work on the repair of water supply networks, caulking, pouring with lead and various substitutes for pipe sockets with a diameter of more than 300 to 900 mm.
2. Installation and replacement of fittings and fittings on existing networks and highways.
3. Determining the nature of damage on networks and highways.
4. Turning off individual sections of pipelines, emptying and filling them with the installation of air inlets and outlets.
5. Flushing pipelines.
6. Adjustment of the operation of valves on networks and pipelines.
7. Taking readings of pressure on the manometer.
8. Tapping under pressure in pipelines.
9. Production of cleaning the sewer network and collectors at a depth of up to 12 m using a hydraulic method.
10. Removal of blockages by flexible shaft, water jet washout and reverse hydraulic pressure method using mobile auto-pumps.
11. Preparation of a cable and a winch with a lifting capacity of up to 1 ton, metal balls and cylinders of a given specific gravity.
12. Repair of the sewer network under the guidance of a more highly qualified locksmith.
13. Production of preventive maintenance of equipment and mechanisms used in cleaning.
14. Welding of plastic pipes.
Must know:
Site water supply scheme;
- rules for reading complex drawings and sketches;
- drawing up schemes, sketches and details from nature;
- ways of sealing sockets manually and with the use of pneumatic tools;
- device for tapping under pressure;
- rules and methods for disconnecting metering pipelines and their heating;
- layout of the sewerage network of the area in which the work is carried out;
- technology for cleaning the sewer network and collectors in a hydraulic way and removing blockages with a flexible shaft;
- the main equipment and mechanisms used in the repair and cleaning of sewer pipelines and structures;
- rules for earthworks in dry soils.
Locksmith of emergency and restoration works, 5th category
Job Description.
1. Performance of work on the repair of water supply networks, caulking, pouring with lead and various substitutes for pipe sockets with a diameter of more than 900 mm.
2. Connection under pressure of pipes of all diameters with preparation and scraping of large surfaces of saddles to existing pipelines.
3. Chlorination of highways and networks with bleach, liquid or gaseous chlorine in urban areas; discharge of chlorine water after chlorination.
4. Production of emergency repair or filling of stuffing box compensators on pipelines under pressure without turning off the network.
5. Closing and opening of large valves on highways and conduits with an automatic drive, pneumatic drive and electric drive.
6. Installation, regulation and repair of mechanical drives.
7. Cleaning of the sewer network, siphons, channels and collectors of round, ovoid, tent and other sections at a depth of more than 12 m using a hydraulic method.
8. Preparation of cable and winches with a lifting capacity of up to 2 tons.
9. Preparation of wooden and metal cylinders of a given specific gravity.
10. Removing blockages in the sewer network and collectors using various rods with ball and brush anchors.
11. Production of repair of the existing sewer network using dewatering devices and mobile cranes.
12. Bonding and assembly of plastic pipes.
Must know:
The device and principle of operation of equipment for tapping under pressure;
- mode of operation of the site network;
- rules and methods of chlorination of pipelines in urban areas;
- safe ways to discharge water after chlorination of pipelines;
- device and features of the operation of siphons;
- construction of stuffing box compensators on pipelines of various diameters;
- methods of flushing pipelines;
- device and principle of operation of mechanical, hydraulic and electric drives used for opening and closing large gate valves;
- ways to eliminate faults in the applied drives;
- layout of the entire sewer network, emergency outlets;
- technology for cleaning the sewer network, siphons, collectors and channels using the hydraulic method;
- ways to eliminate blockages;
- methods for determining the elimination of gas pollution, the rules for excavation in wet soils, the timing of the repair of mechanisms and equipment.
Locksmith of emergency and restoration works, 6th category
Job Description.
2. Maintenance, adjustment and repair of pipelines, water supply, sewer networks, valves and gate valves with a diameter of more than 1200 mm.
3. Shutdown and start-up of main pipelines.
4. Perform switching on the main collectors and channels.
5. Determination of the state of networks and pipelines with diagnostic devices.
6. Management of a sewer cleaning machine when removing blockages in the sewer network.
7. Management of work on the elimination of accidents, adjustment and start-up of complex equipment.
Must know:
Rules for conducting emergency repair work on large-diameter water supply and sewerage networks;
- layout of the serviced water supply and sewerage network;
- features of welding of pipes working under pressure;
- classification of defects welded joints, methods for their determination and elimination;
- methods for establishing and eliminating gas contamination.
Work examples.
1. Stop and shield gates, gate - installation and dismantling.
2. Gate valves with a diameter of over 1200 mm - closing, opening and repair.
3. Device for energy explosion - preparation for work.
4. Underground pipelines - repair without excavation.
Locksmith of emergency and restoration works, 7th category
Job Description.
1. Performance of particularly complex emergency and restoration work on existing water supply and sewerage networks.
2. Maintenance, regulation and repair of water supply and sewerage networks: shut-off valves, gate valves, sockets of pipelines with a diameter of more than 1200 to 2000 mm.
3. Mounting, dismantling, adjustment and testing of automatic equipment pumping units, compressor equipment, automatic temperature control systems in heat supply networks and water heaters of all types.
4. Work management pumping stations in emergency conditions.
5. Evaluation technical condition heat-consuming installations and heat networks with the compilation of a list of defects.
6. Checking the accuracy of the assembly of remanufactured equipment and carrying out a load test.
Must know:
Rules for conducting emergency recovery work on water supply and sewerage networks with large diameter pipelines;
- design features and hydraulic diagrams repaired equipment;
- methods of repair, assembly, installation of components and parts of serviced equipment;
- admissible values of loadings on knots and mechanisms;
- rules for acceptance of equipment from repair and putting it into operation.
We always have on our website a large number of fresh current vacancies. Use filters to quickly search by parameters.
For successful employment It is desirable to have a specialized education, as well as to possess the necessary qualities and work skills. First of all, you need to carefully study the requirements of employers in the chosen specialty, then start writing a resume.
You should not send your resume to all companies at the same time. Choose suitable vacancies, focusing on your qualifications and work experience. We list the most significant skills for employers that you need to successfully work as an emergency repair fitter in Moscow:
Top 7 Key Skills You Need to Get a Job
Also quite often in vacancies there are the following requirements: diligence, general construction work and locksmith work.
When preparing for an interview, use this information as a checklist. This will help you not only to please the recruiter, but also to get the desired job!
Analysis of vacancies in Moscow
According to the results of the analysis of vacancies published on our website, the indicated starting salary, on average, is - 34,957. The average maximum income level (specified "salary to") is 50,000. Keep in mind that these figures are statistics. The actual salary during employment can vary greatly depending on many factors:- Your previous work experience, education
- Type of employment, work schedule
- Company size, industry, brand, etc.
Salary depending on the experience of the applicant
✓ How to find a job as an emergency repair fitter in Moscow?
To view all available vacancies, enter in the field "I'm looking for" the profession "Mechanic of emergency restoration work", in the field "Region" the city "Moscow" and click the "Find a job" button. Choose from thousands of job offers that interest you and click through to find out more details and get in touch with a direct employer.
✓ How many vacancies for the profession of Emergency Repair Mechanic can be found in Moscow?
To date, the site has more than 2 million vacancies. Among them, you will definitely be able to find offers for specialists of the profession Locksmith of emergency repair work in Moscow. All ads are sorted by relevance. To see the latest or highest paying Repairman jobs in Moscow, please select sort by post date or wages respectively.
✓ How often are job advertisements updated for the profession of Emergency Repair Technician in Moscow?
All vacancies on our resource are updated daily. Be sure to come back to the site tomorrow to see new offers and not miss your chance to get Good work emergency repair fitter in Moscow
APPROVE:
________________________
[Job title]
________________________
________________________
[Name of company]
________________/[FULL NAME.]/
"____" ____________ 20__
JOB DESCRIPTION
Locksmith of emergency and restoration works of the 5th category
1. General Provisions
1.1. This job description defines and regulates the powers, functional and job duties, rights and responsibilities of an emergency repair worker of the 5th category [Name of organization in the genitive case] (hereinafter referred to as the Company).
1.2. An emergency repair fitter of the 5th category is appointed to the position and dismissed in accordance with the procedure established by the current labor legislation by order of the head of the Company.
1.3. The emergency repair fitter of the 5th category belongs to the category of workers and reports to [position title of the immediate supervisor in the dative case] of the Company.
1.4. A person with a secondary education, relevant training in the specialty and work experience of at least 1 year is appointed to the position of a locksmith of emergency repair work of the 5th category.
1.5. The locksmith of emergency repair work of the 5th category must know:
- device and principle of operation of equipment for tapping under pressure;
- site network operation mode;
- rules and methods of chlorination of pipelines in urban areas;
- safe ways to discharge water after chlorination of pipelines;
- device and features of the operation of siphons;
- installation of stuffing box compensators on pipelines of various diameters;
- pipeline flushing methods;
- device and principle of operation of mechanical, hydraulic and electric drives used when opening and closing large gate valves;
- troubleshooting methods for used drives;
- layout of the entire sewer network, emergency outlets;
- technology for cleaning the sewer network, siphons, collectors and channels by the hydraulic method;
- ways to eliminate blockages;
- methods for determining the elimination of gas contamination, the rules for excavation in wet soils, the timing of the repair of mechanisms and equipment.
1.6. In his activities, the emergency repair worker of the 5th category is guided by:
- regulations and teaching materials on issues of work performed;
- internal labor regulations;
- orders and orders of the head of the Company and the immediate supervisor;
- this job description;
- rules on labor protection, safety precautions, industrial sanitation and fire protection.
1.7. During the period of temporary absence of a 5th category emergency repair fitter, his duties are assigned to [deputy position].
2. Job responsibilities
The locksmith of emergency and restoration works of the 5th category is obliged to carry out the following labor functions:
2.1. Performance of work on the repair of water supply networks, caulking, pouring with lead and various substitutes for pipe sockets with a diameter of more than 900 millimeters.
2.2. Connection under pressure of pipes of all diameters with preparation and scraping of large surfaces of saddles to existing pipelines.
2.3. Chlorination of highways and networks with bleach, liquid or gaseous chlorine in urban areas.
2.4. Discharge of chlorine water after chlorination.
2.5. Production of emergency repair or pouring of stuffing box compensators on pipelines under pressure without turning off the network.
2.6. Closing and opening of large valves on highways and conduits with an automatic drive, pneumatic drive and electric drive.
2.7. Installation, regulation and repair of mechanical drives.
2.8. Cleaning of the sewer network, siphons, channels and collectors of round, ovoid, tent and other sections at a depth of more than 12 meters using a hydraulic method.
2.9. Preparation of cable and winches with a lifting capacity of up to 2 tons.
2.10. Preparation of wooden and metal cylinders of a given specific gravity.
2.11. Removal of blockages in the sewer network and collectors using various rods with ball and brush anchors.
2.12. Production of repair of the existing sewer network using dewatering devices and mobile cranes.
2.13. Bonding and assembly of plastic pipes.
In case of official necessity, an emergency repair fitter of the 5th category may be involved in the performance of his official duties overtime, by decision of the immediate supervisor, in the manner prescribed by law.
3. Rights
The locksmith of emergency and restoration works of the 5th category has the right
3.1. Give assignments to subordinate employees, tasks on a range of issues included in his functional duties.
3.2. Control execution production tasks, timely execution of individual assignments by employees subordinate to him.
3.3. Request and receive the necessary materials and documents related to the issues of their activities and the activities of employees subordinate to him.
3.4. Interact with other services of the enterprise on production and other issues that are part of its functional responsibilities.
3.5. Get acquainted with the draft decisions of the enterprise's management regarding the activities of the Division.
3.6. To propose to the head of the proposal to improve the work related to the duties provided for in this Job Description.
3.7. Submit proposals for the consideration of the head of the proposal on the promotion of distinguished employees, the imposition of penalties on violators of production and labor discipline.
3.8. Report to the manager about all identified violations and shortcomings in connection with the work performed.
4. Responsibility and performance evaluation
The locksmith of emergency and restoration works of the 5th category bears administrative, disciplinary and material (and in some cases provided for by the legislation of the Russian Federation - and criminal) responsibility for:
4.1.1. Non-fulfillment or improper fulfillment of official instructions of the immediate supervisor.
4.1.2. Failure or improper performance of labor functions and the tasks assigned to him.
4.1.3. Unlawful use of the granted official powers, as well as their use for personal purposes.
4.1.4. Inaccurate information about the status of the work entrusted to him.
4.1.5. Failure to take measures to suppress the identified violations of safety regulations, fire and other rules that pose a threat to the activities of the enterprise and its employees.
4.1.6. Failure to enforce labor discipline.
4.2. Evaluation of the work of a locksmith of emergency and restoration works of the 5th category is carried out:
4.2.1. Direct supervisor - regularly, in the course of the daily implementation by the employee of his labor functions.
4.2.2. Certification Commission enterprises - periodically, but at least once every two years, based on the documented results of work for the evaluation period.
4.3. The main criterion for evaluating the work of an emergency repair fitter of the 5th category is the quality, completeness and timeliness of his performance of the tasks provided for in this instruction.
5. Working conditions
5.1. The work schedule of an emergency repair worker of the 5th category is determined in accordance with the internal labor regulations established by the Company.
5.2. In connection with production necessity an emergency repair fitter of the 5th category can go on business trips (including local ones).
Familiarized with the instruction ___________ / ____________ / "____" _______ 20__
For beginners: breeding a broiler at home Boiled water for broilers
Only lovers will survive
Features of advertising aimed at children
retouching old photos in photoshop retouching old photos
What is an NPO: decoding, definition of goals, types of activities Does a non-profit organization have the right