(17 ratings, average: 4,18 out of 5)

Making a bird feeder with your own hands is a fascinating and useful thing, especially if the kids help you. After all, it is very difficult for our feathered friends to survive the winter cold. Sad statistics show that out of 10 birds, only 2 birds survive until spring sunny days. And by placing the original bird feeder with your own hands in a square, park or on your own personal plot, you will save more than one bird life from hunger.

How to make a bird feeder with your own hands?

arranging breeding ground for birds in your garden or summer cottage, you kill two birds with one stone: you save the birds from hunger in the winter and protect your crop from numerous pests in the summer. Our feathered brothers are effective fighters against midges and other harmful insects. Pichugi will delight you with cheerful chirping, flooding trills or funny games and fuss around food, and all this is exciting to watch.

Having shown a little imagination and made an original bird feeder with your own hands from improvised materials, you will decorate your garden with an unusual accessory! So what do you need to have on hand, how to make a bird feeder with your own hands? Of the materials, empty tin cans, corks from wine bottles, plastic canisters and bottles, cuttings of branches, unnecessary pieces of plywood, roofing material and boards, unused dishes (cups and saucers, mugs, teapots, decorative glass bottles), metal or nylon mesh can fit and other household junk. Rope, fishing line, various chains, ribbons and nylon ribbons, wire will fit for fastening and decoration.

Despite the variety of materials, all designs can be conditionally divided into four groups:

1. Strong and durable feeders, similar to birdhouses, made of wood.
2. "Disposable" feeders made of cardboard boxes do not require any costs, but will not last long.
3. Easy to make, designs from plastic canisters, cans or bottles.
4. Food suspended on strings.

What to use for feeding?

Experiencing a significant lack of nutrition in the cold months, pichugs will peck with great pleasure everything that you offer them. For feeding, use any ground cereals: buckwheat, rice, oats, millet and millet - everything will be eaten. Grind any nuts and grains, add a little honey to the seeds of pumpkin, melon, watermelon, quinoa, thistle, hemp, sunflower, quinoa.

In the bird feeder put small pieces of lard or chicken, boiled and finely chopped egg. Any dry berries and fruits, especially viburnum and rowan clusters, will not be left without attention.

When setting up a dining room for birds, one should not forget to regularly fill the feeder with a nutrient mixture, since birds, getting used to feeding in one place, are ready to fly quite a long distance for food. And not finding food in the usual place, tired and hungry, they can die. Do not use rye bread, roasted nuts, cereals, grains and seeds, salty foods, citrus fruits, fresh rolls for bait. Such products will harm the birds.

When choosing a material for the manufacture of a feeder, you need consider a few things:

How to make a bird feeder accessible and safe?

It is necessary to arrange feeders in open, well-visible areas, that is, in places accessible to birds. In dense branches, heavily ventilated areas, or in places where cats can get to, you should not organize bird feeding areas. Bird feeders, fixed on a tree trunk or branch, or on the walls of outbuildings at a height of about one and a half meters, are easily accessible for birds, it is convenient to add food to them and they are inaccessible to domestic predators.

Most of us imagine a bird feeder as a small house or birdhouse. This form is an ideal solution for organizing bird catering.

Whatever material you choose, design must include:

Lightweight bird feeders made of plastic or cardboard are easy to make heavier by laying a piece of unnecessary linoleum or plywood on the bottom.

The most original bird feeders - grain

To make it, you need a mixture of raw grains, seeds, nuts and bread crumbs. We will make the basis of the feeder with our own hands from thick cardboard and nylon thread, using scissors and a thick needle. Adhesive base made from oatmeal mixed with egg and honey, or from gelatin. Mix 2 tablespoons of oatmeal (not cereal), 1 egg and 1 teaspoon of honey, leave for 30-40 minutes. At this time, we cut out the base for the feeder from cardboard in the form of hearts, stars, and any other geometric shapes.

To fasten a delicacy treat on branches, using a thick needle, we thread a thread, lace, braid or ribbon through a hole in a cardboard blank. We apply the swollen sticky mass to the base and roll it in the prepared grain mixture. We put it in the refrigerator for solidification and after a few hours the treat for birds is ready!

With a gelatin base, the manufacturing process is even easier. We mix the prepared nutrient mixture with a warm gelatin solution and pour into silicone baking molds. Having put a loop for fastening on branches, we send it to harden in the refrigerator.

The original solution for such feeding will be old crockery. We leave the food prepared in any way to solidify in mugs or a teapot that has become unusable. We tie the fastening thread to the handle of the product. We hang sweets on trees and watch the feast of birds.

Cardboard box feeder

How to make a do-it-yourself feeder from a box of sweets or parcels, milk or juice. Having put the edges of three candy boxes into each other in the form of a triangle, we glue or use adhesive tape, thread any cord or ribbon through the roof and fasten it to a tree. The feeder is ready. Designs from packages from any drinks will last a little longer, since they have a laminated layer inside and out, moisture-proof. An entrance is cut with a knife or scissors, a round or square hole in one of the sidewalls, a little higher than the bottom of the box. A rope is attached to the top for hanging on a tree. The feeder is ready in a few minutes.

Similarly, you can make a feeder with your own hands from plastic containers: bottles, canisters, cans.

It is easier to fix a plastic feeder with a wire. And to protect the birds from injury, glue the inlet with tape or tape. From plastic bottles, spending a little more time, you can make an elementary bunker feeder. To do this, two through holes are made in a one and a half or two-liter bottle: the first at a height of 10-15 cm from the bottom and the second in the center of the container, perpendicular to the first. Two wooden spoons are inserted into these holes. Holes on the wide side of the spoons expand to spill feed. Through the neck of the bottle, it is convenient to add food to the feeder, under the weight of the grain mixture plastic feeder gusts of wind are not terrible, the food remains dry and accessible to birds for a long time.

Having warmed from the inside, with yarn or sisal, one and a half or two-liter capacity, you will know how to make a birdhouse from a bottle.

A little more time and skill will be required to make a plywood bird feeder.

It can be with a gable or flat roof, open or with a bunker compartment. To make even the simplest feeder, like a birdhouse, you will need a drawing that can be found on the Internet or calculate the design yourself. Of the tools needed: hammer, jigsaw, nails, glue, sandpaper. In addition to plywood, you will need a bar.

Procedure

A plywood feeder is suspended by a rope threaded under the roof or a hook screwed into the roof. The service life of such a structure will be extended if it is varnish or oil paint.

Classic dining room made of wood

However, with a little imagination and ingenuity, you can create a real masterpiece!

Of the tools at least you will need: a hammer and nails, self-tapping screws and a screwdriver. Cuttings of boards can be combined with croaker or branches, preserving the bark of the tree, small twigs or straw will decorate the plywood roof of the feeder in an original way. The roof of the wooden feeder can be mounted both on four support posts and on two flat supports located opposite each other. In addition, a two-leg feeder can be duplex or bunker. And, having certain skills and appropriate equipment, the sides of the birdhouse dining room can be made in any shape.

The manufacture of a double-walled feeder does not require an exact drawing of a bird feeder and adherence to exact dimensions. But there is unlimited scope for creative thought.

The assembly of the structure takes place in the same sequence as the plywood feeder. The bottom is fastened with supports, then the sidewalls and the roof. Since a bird feeder made of wood is quite heavy and durable, it can be installed either on a support pole or hung by a wire or rope on tree branches.

For the convenience of small birds, titmouse and sparrows, thin perch branches can be attached parallel to the sidewalls. And having sawn round “windows” in the walls and threading a knitting needle or a metal pin through them, it becomes possible to diversify the feathered table with apples, pieces of pumpkin or lard.

The ideal solution for "remote" food outlets, especially near birdhouses, is dispenser installed inside a double-walled structure. One of the options for the bunker is with glass or plastic sidewalls. On the inner side of the walls, vertical grooves are sawn, not reaching the bottom about a centimeter, into which sidewalls made of glass or plastic are inserted. The food will spill out through the gap as it is eaten by the birds.

An easier-to-make feeder in which a plastic bottle serves as a hopper. Cut off at both ends, with the help of a wire, it is suspended in the center of the feeder a couple of centimeters above the bottom. For the convenience of filling the hopper with nutrient mixture, the cover of the feeder is removable.

Not being able to frequently replenish food in the feeder, a full bin will keep the bird treats well and allow the birds to stay full for a long time.

By placing a do-it-yourself birdhouse made from improvised materials next to the dining room, you will provide tits and other small birds and housing and food.

Whatever idea of ​​​​making a feeder with your own hands you would not choose, the birds will certainly be grateful to you! Having tried your hand at making a feeder, you can also make a birdhouse with your own hands from improvised materials.

Bird feeders

Birds are our smaller friends who delight us with their chirping and singing. Yes, and any garden in the presence of birds seems to come to life, is filled new life. Besides birds help to protect in summer country cottage area from attacks of various insects. And in winter, when they have almost no food, the task of a person is to help the birds survive the frost by feeding them. A good attitude towards birds will pay off handsomely. for birds with their own hands is done quickly, without unnecessary manipulation, it will not only become a source of food for birds, but it will also be able to decorate any area.

Feeders for winged birds were made by many while studying at school, and someone, together with their parents, managed to make far from one feeder while still visiting Kindergarten. At that time, tasks for making feeders were given at school in order to instill in the child a desire to work and take care of our smaller brothers.

Now, in most cases, feeders in the adjoining areas are located in order to lure birds to permanent residence in the garden or for the purpose of caring for them in the winter. There are a great many variations of feeders, but do not forget that if a person pursues a good goal, he must make sure that the feeder is not just beautiful, but comfortable and attractive to birds.

So what should it be like so that birds from all over the area flock to peck at delicious delicacies?

1. The feeder should not be bright. Do not forget that birds are inhabitants wildlife, wherein bright coloring often speaks of the danger of an insect or animal. So it is unlikely that birds will fly to nuclear flower feeders. Most a good option- the color of the wood.
2. The place for feeding should be equipped with small sides so that the food does not fall out of it during the wind and at the moment when the bird lands on the feeder and shakes it.

   

3. It is important to make sure that the sides and other elements of the feeder are not sharp and do not pose a danger to birds.
4. The best thing, so that the feeder has a small roof- then the food lying in it will not get wet in the rain, and it will not be covered with snow.
5. It is recommended to place the feeder where cats and other predators cannot reach it.. Then the birds will happily fly to it. If the place carries danger, then it is unlikely that it will be possible to lure the birds.

   

6. All openings in the walls of the feeder must be spacious so as not to create the effect of an enclosed space. Otherwise, the birds will be uncomfortable.
7. It is best to make a feeding place that will withstand various weather conditions and will not collapse after the first season.
8. Feed in the feeder should be clearly visible- Birds use their eyesight more than their other senses when looking for food.

   

Advice! In order to make the structure heavier and protect it from swinging in the wind, you can place pebbles in it, but so that they do not end up in food.

Which is better: homemade or from the store?

You can make a place for birds to eat on your own, but the stores now sell ready-made designs and products that you can simply purchase and hang in your garden or outside the window. Of course, then a lot of time is saved, but it’s better to make the feeder yourself or order from the masters. Only in this case, you can be sure that the feeder is made of materials that are safe for flying inhabitants of nature and will perform its function correctly.

On a note! Undoubtedly, you need to pay attention to the design of the feeder, but if this is not just a decorative decoration of the garden, then, first of all, you should pay attention to its functionality.

It is also important to understand that a good feeder, but made in production or by craftsmen, will cost a lot of money. So it’s worth considering what to do - save money and do everything yourself, or still spend money and buy a ready-made version.

Provided that a feeding place can actually be made quickly and easily enough, the DIY option remains the best. The main thing is to decide and decide what and how to make a feeder, how and where it will hang, and also take into account the availability of skills in the manufacture of various products. You should not take on a complex project without proper experience, it is easier to choose the simplest option. Fortunately, there are many types of feeders.

Table. Types of feeders.

View	Description
	This category includes all types of feeders that are fixed in the right place by hanging. Such a design, most likely, will require weighting with something so that it does not sway in the wind and during the landing of birds. This category also includes simple feeders with bacon or grains stuck together in one lump. They are hung from the trees on the braid.
	The most familiar, familiar from childhood and common option. The roof of such a product is made in the form of a house, it protects the food from getting wet. It is best if the roof is installed on thin blocks so that there is as much free space for birds as possible.
	Such a feeder is a board with sides, fixed on something or suspended. It does not have a roof, and therefore the food will constantly get wet or covered with snow. But this is the easiest option.
	Such a feeder is a small container-bunker, inside of which there is food. The birds, pecking at the food spilled out on the pallet, make room for the new one, which gradually spills out of the bunker. Also, in some cases, birds can peck at the grain directly from the hopper. The main advantage is good protection of the feed from water and wind.
	Feeder designed for stubblers. Often sold in stores. It must be periodically cleaned of debris, as the birds will leave it behind themselves and food in large quantities.

On a note! The design can be made simply from feed, combining the grains into a single lump with the help of various nutrients and hanging such a “gingerbread” in a conspicuous place. Suitable for small birds that will peck out grain from the feeder, catching on it with their claws.

What can you make a feeder out of?

You can make a feeder yourself from a variety of objects and materials, ranging from an ordinary board to a plastic bottle or even a tetrapack box. Each material has its advantages and disadvantages, and it is necessary to choose what the food base will be made of, based on the presence of certain skills in working with various tools, the availability of free time, funds, and the goals of creating a place for eating.

Wooden feeders

The best option for creating a bird feeding area was and remains a natural, untreated tree. Such a design will be closest to nature, and its neutral color and smell will not scare birds away from food. It is ideal if the natural bark is preserved on the boards. So when choosing a material, you can stop at saw cuts of birch, pine, etc. You can even make a feeder from branches!

Wooden feeder - the best option

But in order to make a wooden, even the simplest feeder, you will need certain skills and tools for working with wood.

Advice! It is not necessary to decorate a wooden feeder with various bright objects, but it can be decorated natural material, for example, masking the roof with twigs, cones, leaves.

How to make a tree feeder?

Consider how you can make the simplest feeder from wooden materials. To do this, you need to buy wooden blocks, a small piece of fiberboard, a furniture stapler, a saw, drawing supplies and a tape measure.

Step 1. From a sheet of fiberboard you need to cut a square or rectangle. You should apply a drawing of a square or rectangle of the appropriate size on a sheet of fiberboard, and then cut off the excess with a saw.

Step 2 Now you need to make the sides for the pallet. It is necessary to cut out two pieces of the same length from the bar, equal to the side of the square or the long side of the rectangle, as well as two shorter pieces, which will be equal to the width of the square or the narrow side of the rectangle, minus the thickness of the bar.

Step 3 The sides need to be attached to the bottom of the feeder, which was previously made from fiberboard. The easiest way to do this is with a stapler.

Step 4 Now you need to make 4 supports for the roof of the feeder, all from the same bar. They must be the same height.

Step 6 The upper parts of the supports standing on one side must be connected with crossbars cut from the same bar. You should also make saw cuts on them at an angle of 45 degrees.

Step 7 Next is made. It is required to connect two sheets of fiberboard at an angle of 90 degrees. The connection is made using a small "ridge" bar with a length equal to the length of the slope. It is worth remembering that the roof should hang a little over the tray of the feeder, which means that the slopes should be made taking this factor into account.

Step 8 Next, the roof must be fixed on the racks for it using the same stapler or nails. The junction of two slopes can be glued using any material that does not allow water to pass through. The feeder is ready. If desired, it can be stolen with cones and branches.

Advice! While fixing the sides on the bottom of the feeder, they can be additionally smeared with PVA glue to ensure the connection not only due to the stapler staples, but also due to glue.

Feeders with sides are most loved by shelling birds, and for the rest, you can make a feeder without sides. The main thing is that the side is not too high.

Similar designs can be made from plywood, refusing to use fiberboard. In this case, the feeder will be more reliable and durable.

Video - Wooden feeder

Simple hanging feeders

These are very simple feeders, they can be easily and simply made in just a few minutes. They are a delicacy placed on a braid or in a case and hung on a tree. Often, according to this principle, pieces of fat for tits are fixed on the trees. You can also make balls from seeds. To hold the grains together, you can use peanut butter or interior fat. And such feeders just need to be fixed on a braid somewhere in a place noticeable to birds. To attract attention, you can try to tie a sprig of mountain ash to such a feeder. You need to form balls on the street so that they immediately freeze in the cold.

Advice! It is best to make pendants in the shape of a ball, and not in some beautiful and exotic shape. It is the ball that is the most convenient option for birds.

Making a fat feeder

Let's see how you can make a simple structure for placing fat, for the manufacture of which you will need twine, wire and a regular hoop - an accessory for embroiderers.

Step 1. In the store you need to buy ordinary plastic hoops. They need to be separated into two halves, but in the area of ​​\u200b\u200bthe castle, the hoop should remain connected.

Step 2 In the area of ​​\u200b\u200bthe castle, you need to wrap the hoop with wire on both sides.

Step 3 On the other hand, where the hoop is separated, you need to make a wire jumper and wrap it with a “tail” from the wire to about the middle.

Step 4 The rest of the wire must be twisted and formed into a hook at an angle of 90 degrees, which is directed inside the hoop. Fat will be planted on it.

Step 6 After that, the hoop and wire must be wrapped with ordinary twine. The feeder is ready. It remains to place it in the right place in the garden and put a delicacy for the birds on the pin.

Making a feeder from a plastic bottle

Of course, you can just cut a hole in the wall plastic bottle and hang it on a tree, filling it with grain. But you can contrive and make the feeder a little more complicated. To do this, you will need pallets for flowers of different diameters and a plastic bottle of about 1.5 liters. A strong rope will also come in handy.

Step 1. In one of the pallets (which is smaller), you need to make a hole of the same diameter as the neck of the bottle. You can cut it both with a knife and with a special crown put on a drill.

Step 2 Next, you need to remove the cap from the plastic bottle and screw the bottle itself into the tray with the neck, and screw the cork onto the neck from below. But for now, the structure can be temporarily disassembled. A small hole should be cut in the side of the bottle so that the food can spill out of it and be available to birds.

Step 3 Cut off the bottom of the bottle with a sharp knife.

Step 4 Now on the pallet - both on the first and on the second - you need to mark and drill holes for the rope. First you need to make holes on the smaller one, and then, applying it to the larger one, mark it and also drill holes.

Step 5 The final assembly is underway. The bottle must be screwed to the bottom tray.

Step 6 It is required to cut six pieces of rope of the same length. The rope is better to take dense and thick enough. You can also use a synthetic version.

Step 7 Now on each rope you need to tie a knot at the same distance from the edge.

Step 8 It is required to thread the ropes into the holes on the small pallet so that the short tails of the ropes are at the bottom.

Step 9 The second pallet will become a makeshift roof for the feeder. Now you need to thread the ropes into the holes of the second pallet.

Step 10 The ropes must be well tensioned. You should get the same design as in the picture.

Step 11 Now it is required from below and above from the remains of the rope to form "tails". On the top side, do not forget to make a loop for hanging.

Step 12 It remains only to fill the feeder with seeds and fix it on tree branches using a hanging loop.

Video - Large plastic bottle feeder

Video - Glass bottle hopper feeder

You can make bird feeders from any material. In haste, a feeding place can be built even from cardboard, but such a feeder will not last long. If you want to decorate the garden with beautiful and durable feeding places for birds, then it is better to spend your time and make a tree feeder.

(7 ratings, average: 4,86 out of 5)

DIY bird feeder - examples and ideas

You can make a beautiful bird feeder from improvised materials. Consider a few ideas of original feeders made of wood, plastic bottles, cardboard, juice bags, as well as dimensions, drawings and photos. finished products.

Don't let the birds starve to death in winter - prepare a beautiful feeder with delicious treats for them. Enjoy the cheerful and joyful chirping of little titmouses or sparrows.

In the cold season, it becomes increasingly difficult for birds that remain to winter to get food. Heavy snowfalls, icing and frosts are a real threat to birds. Many birds, due to a lack of calories, freeze, without waiting for fine days. Man remains their only hope. Even a few bread crumbs from the table or a handful of cereals can save the life of funny little birds.

It is quite easy to please bullfinches, tits, sparrows with delicious delicacies. For this you need to make a simple feeder from wood or other improvised materials and periodically pour grain or bread crumbs into it. You can make an original feeder at home. A variety of improvised materials are suitable for this, for example, plastic bottles, cans, five-liter bottles, cardboard boxes, plywood trimmings, imitation timber and much more. A beautiful and reliable feeder can be built even from wood. To do this, you need to prepare a drawing and select suitable wood trimmings or wooden planks.

How to make a bird feeder with your own hands?

A homemade feeder can be made from various improvised materials. To do this, you can use wooden planks, plastic bottles, boxes, ceramic cups and many other suitable materials.

How to make a bird feeder in kindergarten with a child?

A children's bird feeder made with a child will be a great craft for kindergarten. This will allow from a young age to teach the child to take care of others, and will also be an entertaining and interesting activity. The original feeder, decorated on its own, will perfectly complement the garden plot. Just imagine how pleasant it is to watch small feathered friends who chirp cheerfully, helping themselves to a delicacy prepared for them.

If you want to make a feeder in kindergarten with your child Be sure to consider his age. For kids, it is better to choose simple options for home-made feeders so that the child can participate as much as possible in the process, developing their own imagination and hand motor skills. Older children can participate in the creation of more complex crafts, made for example from plywood or wooden planks.

Bird feeder from a plastic bottle

You can make a bird feeder out of plastic bottles in minutes. Suitable for this 1.5 or 2 liter plastic bottle for mineral water or lemonade. To make a feeder for tits and sparrows from a bottle, you need to mark a hole with a marker and carefully cut it out with sharp scissors. A soft wire or cord should be tied to the neck of the bottle, with which it will be possible to hang it on a tree branch.

Also for birds, a self-filling or bunker feeder from a bottle is suitable. To make a hopper feeder, you need to prepare two bottles of the same volume. On one of them, you should also mark a hole, cut it out, and then cut off the upper part along with the neck. In the second bottle, it is necessary to pour grain for birds, then put the first one on it and turn it over. After that, the grain from the second bottle will be poured into the first as the birds peck it out.

Bird feeder from a canister or mayonnaise bucket

You can make a bird feeder from improvised materials at home. For these purposes, you can use a plastic canister or mayonnaise buckets, as in the photo below. The shapes and configurations of feeders can vary greatly. Ideally, all of them should be covered so that in winter the grain is not covered with snow.

A plastic bottle feeder for birds should not have sharp edges so that the birds do not cut their paws during lunch. After cutting holes in the bottle, the edges can be pasted over with electrical tape or plaster. The windows in the bucket should be large enough. Mount such feeders should be higher on the branches of trees or in other places where the birds would not be in close proximity to cats.

Original feeder from improvised means with a photo

The onset of cold weather is a great excuse to hide at home and do needlework. Even manufacturing do-it-yourself birdhouse or a simple feeder can be a fun and enjoyable activity for family members. There are many options for feeders. Here are a few ideas that can be easily implemented using simple improvised materials.

A simple bottle feeder with wooden spoons

Simple and convenient feeders can be made using plastic bottles and wooden spoons from kitchen sets. This design is quite convenient for birds, because spoons serve not only for additional grain collection, but also act as comfortable perches. To make such a feeder, it is necessary to prepare through holes in the bottle so that the spoon is located with a slight slope. Above the spoon, you need to make additional holes through which the food will be available to the birds. The level of grain should be higher than a spoon, therefore, as it is consumed, the feed must be added to the bottle.

Tin can feeder

To make such a feeder, you can use any tin can, preferably with a plastic lid. A can of coffee or cocoa is perfect for these purposes. How to make a feeder from a jar, can be clearly seen in the photo. The plastic cover in this case acts as a barrier to the grain, preventing it from spilling. The bottom of the jar can also be removed. To fasten the jar, you can thread a thick cord or wire through both holes.

How to make a bird feeder from a juice box

Milk bags and juice well suited for creating a feeder. Such packaging is easily cut with an ordinary knife or scissors, and does not sag in rain or snow. To make a feeder out of a juice box, you just need to mark a hole with a marker and cut it out with a kitchen or clerical knife.

In a similar way, one can cardboard bird feeder, cutting out the necessary parts and gluing them with PVA glue. However, cardboard construction is not the most good option. It quickly sags under the influence of moisture, so it is not used for long, and even then mainly under a canopy.

A bird feeder made of wood is a great solution for birds!

Homemade wood bird feeder- this is the most reliable and durable design option, which can also be done at home. Any person who has a hammer, a saw and, of course, a desire can make it. To make a wooden feeder, it is not necessary to buy materials. You can simply take scraps of plywood, wooden boards, lining or other materials remaining after the repair.

The dimensions of the feeder are shown in the drawing. If desired, you can make a feeder with a smaller bottom, for example, 250 x 200. If you have wood trimmings that can be used, be guided by their length.

So, the flooring for the roof and the bottom of the feeder is made of plywood. To do this, you need to prepare three parts: the bottom - size 300 x 240 with a thickness of 3 mm, roof details - 280 x 212. Crossbars, racks and others structural elements can also be made from wooden slats. If necessary, parts should be sanded, and after assembly - varnished or painted.

The assembly of a wooden feeder is carried out in several stages:

• Take a wooden piece for the bottom and use nails to attach four corner posts to it;
• Fasten the sides with nails, nailing them to the bottom and corner posts;
• Place the planks of the crossbars on top of the racks and nail;
• Place the connecting rail and roof rails on the crossbars according to the drawing;
• Build a roof deck;
• Decorate the craft as desired, varnish or paint.

As a result of the work performed, a reliable and beautiful wooden feeder capable of lasting more than one year. To protect the product from rain, the remnants of linoleum, waterproofing film or other moisture-resistant materials can be stuffed onto its roof.

The design and size of a wooden bird feeder can be different. Look very interesting wooden crafts, decorated with painting or wood carving. Each person who owns certain decor skills can decorate a wooden feeder with your own hands. Sometimes feeders are made in the form of a house, complementing it with windows and doors, constructing miniature fences and other decorative elements.

Bird feeder made by hand from improvised materials

A few more original ideas for making feeders.

Easy to make and beautiful.

Ceramic cup feeder. Happy tea!

Feeder of 5 liter bottle beautifully decorated.

Bird feeders - original ideas with photos

Coconut feeder. Everything is simple.

A simple feeder can be made even from an ordinary coconut. Do not be afraid to show imagination to please the birds. Any materials at hand can be turned into a real masterpiece!

Wicker basket feeder.

Wooden feeder with a house. Two in one.

Feeders from improvised materials

You can make a feeder from improvised means. You can make it from a piece of ordinary wood, a saucer and even a car headlight. The main rule is that the feeder should be comfortable. It should protect birds from rain and snow and be hung above the ground at a safe height.

Feeder from a car headlight.

Don't know how to properly feed birds? Organize them a comfortable place, sheltered from rain or snow. For this, any materials are suitable. Look, for example, if you have an old car headlight lying around in your garage?

A feeder carved from a piece of wood. Unusual log crafts.

What can you feed the birds in winter?

When the first snow falls, it becomes quite difficult for the birds to get their own food. Because of hunger and cold, many of them die without waiting for fine days. Snow and ice hide all the remnants of edible food, while birds have to spend much more energy on natural warming than they get from food.

To save our feathered friends from death, you can build a feeder and periodically replenish it with edible treats. You can feed the birds in winter with breadcrumbs and cereals, such as oats, millet, wheat and barley. Birds also eat rice, pumpkin seeds and seeds well. Tits are very fond of eating pieces of bacon, which can be hung in a large piece directly on a tree branch.

Food for tits and other wintering birds

In winter, it replaces larvae and beetles that birds eat in natural conditions. However, when preparing such a delicacy, one should not forget that it should not contain salt and any spices. You can fix the pieces of fat by passing a strong cord through them or placing them in a citrus net. It is better not to give millet and fresh fruits to birds. Bananas, sour foods, black bread and citrus fruits are also contraindicated for them.

Since not only tits strive to feast on treats, universal feeds can also be poured into the feeder. Great for attracting birds raw sunflower seeds, nuts, white millet, seeds of watermelon, burdock seeds, swans, thistle, dried rowan, ash seeds and maple. The latter are very fond of bullfinches, which also need winter bait.

By the way, you can build a feeder not only for tits and sparrows, but also for squirrels, woodpeckers and jays. For them, you can save nuts and acorns, put cones in the feeder. During the nesting period, the birds can be added to the feed crushed egg shell, shell rock or crushed chalk. The supplement will also help digestion. river sand or eggshell.

Generally bird feeders- a fairly simple product that does not require any special skills in manufacturing. You can build it from various improvised materials, involving even the smallest children in the process. You can install the feeder near the window to watch the birds right from the house. However, it is better to hang it higher so that cats do not get to the birds.

Beautiful bird feeders

If you decide to build a beautiful and original feeder for birds, we suggest that you study designer products. Such bird feeders will not only please the birds, but will also be an excellent decor for the backyard.

By the way, if you have a desire, you can always do original feeders on one's own.

If you are skilled in wood carving, you can make a carved feeder that will be a great decor item for your garden.

Ceramic bird feeders also look very original.

Forged bird feeders with original design.

What should be a bird feeder

There are no special requirements for feeders. However, consider the following points:

1. A roofed feeder will be better protected from snow and rain. Such a design will withstand natural precipitation longer, and it will be easier for the birds themselves to eat in bad weather.
2. Wood products are more practical and reliable. They are not afraid of moisture and can last for several years.
3. Making a beautiful feeder with decorative pattern, you can not only attract birds, but also profitably decorate your own backyard.
4. When making a feeder from a plastic bottle, small openings and sharp edges should be avoided. Remember that a quality feeder should be comfortable and safe for birds.

Unusual feeders made of glass and metal.

Bird feeder - time for good deeds

Every time we brush crumbs off the table or sort through cereals, we don’t even think that we can do a good deed and feed hungry little birds. But it's so easy - to make a feeder and feed your feathered friends with simple and tasty delicacies.

In the winter season, the feeder with treats sometimes becomes the only source of food for tits and their brethren. When everything is covered with snow, it is not at all easy to get food.

Even a child can make a feeder on their own. For this, various improvised materials, packaging, beverage containers, wooden boards or cardboard are suitable. Even pieces of simple fat, suspended on a thread from a tree branch, will become an exquisite delicacy for tits. Having once found such a treat in your yard, feathered friends will definitely invite their fellows, and already with a whole flock they will delight you with their chirping, returning to you every day for new portions of lunch.

Simple and beautiful feeders from plastic.

2017-06-25 lev

How to make a bird feeder

Bird feeders are a great topic for both bird lovers and inventors of small architectural forms. How to do simple or fancy feeder from cardboard boxes, from plastic bottles, from cans, from a wooden block or a bucket of mayonnaise, as well as from packaging for a cake and from everything else, what to feed titmouse and what sparrows eat look and read - ideas fly in the air and land on this page.

The cutest and most beautiful "cafe" for birds

What a beauty!

Master Class
1. With a hot knife, cut the bottle in two places along the basting. See for yourself what width of the strip to cut, there are no exact dimensions.

Cut according to the mark

2.See the picture below. Cut out a wider strip, get a more squat figure, cut out less - the product will be higher.

The height of the feeder depends on the height of the cut piece

3. At the bottom of the bottle, cut a hole for the birds to land on, as shown in the photo. Do not forget to walk along the edge of the window with a hot knife so as to melt the cut and make it not sharp. The bird will sit on the edge of the window with its paws and should not be cut.

To prevent the birds from cutting their paws

Paint the bottom of the bottle with acrylic paint.
4. When the paint is dry, make two holes with a hole punch (or a hot nail) in the bottom of the bottle, on either side of the entrance to the feeder at the same distance.

Hole punch makes holes neater than a nail

5. Symmetrical holes must also be made in the upper part of the bottle, twine will be threaded into these holes, with which the upper and lower parts of the bottle will be connected and this beauty will be hung.

Connect the bottom and top of the structure with twine

6. Color the top of the bottle and don't forget the cork. Let dry.
7. The twine will be threaded according to the scheme:

The twine connects the top and bottom of the feeder, and the knots are pulled up through the hole in the cork

8 Make a hole in the cork, take the knots and pull the two ends of the twine by the knots through the hole in the cork.

Pass the twine through the hole in the cork

9Decorative detail. Make additional holes, as shown in the photo, on the bottom and top of the bottle and fasten the parts with decorative rivets. This will additionally fasten the details and give the look of a “brand item”.

Rivet holes

Align the rivet holes on the bottom of the product with the same holes on the top.

Rivets especially decorate Raffia palm string bow

And from such bottles, funny feeders would also turn out.

minion feeder

From cardboard boxes.

Any cardboard box with a hole cut out, suspended, and filled with food, this is a feeder. For example, a box from Rafaelo or boxes from New Year's children's gifts, which are accumulated in every house in abundance after the New Year.
We use milk bags, paint and decorate with buttons and twigs. Glue with silicone glue with a glue gun. (I bought myself a glue gun at a hardware store, it was 3 times cheaper there than in a needlework store).

Feeder from a milk bag with buttons
Cardboard box feeder
Raffaelo box
Christmas gift boxes

By the way, if there is no balcony, but only a window, then the cardboard device will come in handy, it will not break the window when you lower it out the window onto the windowsill. My only fear is that in this house the neighbors are not happy to feed the pigeons so close to the cars. It would be necessary to make the hole in the box small, then the pigeons would not be able to feed on the windowsill, but the tits would scurry back and forth and delight the child and the kitten with their bustle. And so after all it's boring to look at the dove's ass sticking out of the box.

The girl hangs the feeder outside the window (So much effort, but only the pigeon's ass is visible).

Bird "bistros" from cans

Tin can feeders
To prevent the birds from cutting themselves, smooth the landing edge of the feeder.

Baby formula cans are very bird-friendly.

Lauren Martin, a French horticulturist, has set up a whole feeder garden in her home.

From plastic bottles, it's easy.

The simplest homemade bird canteen that allows you to pour a full bottle of seeds, as a small hole prevents the seeds from getting enough sleep.

The simplest bird feeder

We do this according to the scheme:

How to make the easiest plastic bottle feeder
Make it easy

From other improvised materials.

From the packaging for the cake.

Cake for tits

wooden bar idea

bird bar idea

From plastic buckets for mayonnaise.

Bucket for birds1 Bucket for birds2

wooden blocks

It is quite difficult to make, but the look is very eco-friendly

From whole coconut.

When the holiday is over and the flesh of the coconut is eaten, the capacity of the coconut feeder will be filled with simple food in the form of seeds and the exotic restaurant will turn into a budget eatery.

Two options for one technology:

How and where to place top dressing.

This is actually an important question. After all, we live among people and our interests or the interests of our feathered friends should not conflict with the interests of the people around us.
If the droppings of birds that we bring to our window or balcony regularly fall on the lower balconies or on the cars of our neighbors, expect trouble. And do we need it?
Solving this problem is simple. You need to know a few things.
1 Feed pigeons only on the ground, away from parking lots, balconies and window sills, so that pigeon droppings do not harm us and our neighbors.
2 Sparrows, unlike tits, do not fly away immediately as soon as they take food, they sit in the same place where there is food and poop in the same place and throw the husks from the seeds in the same place. Such a fellow sits on the edge of a bottle or a perch, takes the seeds, pecks and throws the husk back into the seeds or next to them. Spit, brat, all around. Tits are afraid of him and wait, sitting on the branches nearby, when he is full. Therefore, a container with seeds should be hung away from the wall of the house,

1. Here's at least how my neighbors did, look at the video.

This is a Yurok, they are wintering with us. These birds are like sparrows, they sit until they are full and try not to let the tits in, and the titmouse fly up, take a seed and peck out a seed from a branch.
2.Or place inside the balcony so you can clean up after your guests.

Cup on the balcony
Titmouse love fat
Serious feeder
Titmouse on the slope of the window
We fix the feeder with a dowel
Feeder with lid - very convenient for filling with seeds "Bread pipeline"

A child living in this house called this structure a "bread pipe"

What do tits eat

For feeding tits, unroasted sunflower seeds, unsalted lard, fat, nuts (chopped, with soft pulp, such as walnuts) and an exotic option - a sawn coconut suspended on a string, are suitable.

What not to give birds
You can not give salty fat, roasted sunflower seeds, smoked products, rye bread.
Titmouses will not eat either buckwheat, or millet, or rice.
But sparrows will eat millet and crushed grains and raisins.

By the way, wild grapes () on your balcony will also attract birds. An alpine jackdaw flies to us, see the video at the end of the article.
Fat treat

Treats for the birds

Salo can simply be hung on a thread or cut into pieces and put in a vegetable net, I'm on my feeder, which is both observation deck for my cats in the summer, I made such a design.

We present to your attention several options for interesting bird feeders made. It turns out that the feeder can be easily made from ordinary plastic bottles, all kinds of boxes, wood - there would be a desire. This article will try to awaken this desire in you, thanks to which many birds will be able to comfortably survive the winter.

To begin with, let's take a look at a great many different feeders made from a variety of materials. This will help you decide on the image, choose the option that suits you.

plastic bottle and glass jar

Indeed, with the help of wood, the feeder can be given any look: you can build a mini-castle, you can put an ordinary “dining room” on racks, you can decorate the feeder with intricate carvings, etc. as far as your imagination allows and there are the necessary building materials.

It is very good when children are involved in making - they immediately develop such character traits as caring for their neighbor, love for animals, responsibility, they show an interest in crafting, creating something!

Whatever you make your feeder out of, it is important to know the basic (and mandatory) elements of the feeder:

1. Your feeder must be with a roof - so the food will remain dry and not covered with snow, and it will be easy and simple for the bird to enjoy your treat;
2. Be sure to make the opening of the feeder wide enough, the birds are very shy, especially afraid of enclosed spaces. What if several hungry flyers arrive at once in your “bird dining room” for lunch? It is important to take care of this option;
3. When choosing a material for the feeder, be guided by its strength and moisture resistance: the denser and more moisture-resistant the source material, the longer your feeder will last;
4. The feeder very often turns out to be too light, therefore it reacts to every gust of wind, while grains and crumbs crumble and the birds remain hungry. To cope with this problem, you need to slightly weight the feeder. To do this, lay a piece of plywood, linoleum on its bottom (strictly according to the size of the bottom).

Now you will learn how you can independently make a similar feeder from all kinds of cereals.

This feeder looks great and, at the same time, perfectly copes with its functions! Tree branchesdecorated with similar "decorations" give your garden an aesthetic and exclusive view. So let's get started!

We will need:

All kinds of grains, crumbs, seeds - all raw, as fried ones will only harm small flyers;
Egg;
Oatmeal;
Honey;
Gelatin;
Flour;
Pencil;
Thick cardboard;
Scissors;
Dense kapron thread.

1. Using a pencil and a regular sheet of paper, draw the shape of the future feeder. Hearts, stars, triangles, circles, squares will look beautiful - any geometric figures;
2. Cut out a paper blank with scissors and attach it to thick cardboard. Circle with a pencil and carefully cut along the contour;
3. Take care of preparing bird food in advance. Pick up unroasted and unsalted grains, all kinds of bread crumbs;
4. Using a needle and a dense nylon thread, make a hole in the cardboard base and thread the thread into it - with its help this “delicacy” will be attached to a tree branch;
5. In order for the grains and crumbs to stick together and attach well to the cardboard base, start preparing natural glue:

• 2 tbsp. tablespoons of oatmeal (in no case oatmeal);
• 1 egg;
• 1 teaspoon of flowing honey;
• Flour.

All ingredients are thoroughly mixed in a bowl and left for 30 minutes. for swelling.

6. We apply the prepared adhesive mass to the base;
7. In another container, thoroughly mix all our grains;
8. We dip and roll in the resulting crumb-grain mixture our base coated with “glue”;
9. Ready grain feeders must be put in the refrigerator for several hours - the mass should solidify well and acquire the necessary strength;
10. Hang such delicious “treats” on the branches of trees and watch from afar the feast of birds that have flown in to treat themselves and feast!

Dissolve one sachet of gelatin in warm water;
Pour all kinds of grains into the still warm solution;
Prepare ordinary cookie cutters, put a thread in them and fill with the resulting grain mixture;
Send the molds with the contents to the refrigerator to thicken;
Delicious toys are ready, you can safely hang them on the branches of trees!

Another "quick" option is to get a few old cups, or take ordinary plastic cups, fill to the top with the prepared mixture (on any basis from the proposed ones). After the mixture thickens in the refrigerator, tie the feeder to a tree branch with a ribbon! The quick version is just as good!

An ordinary cardboard box can successfully serve as a dining room for birds! However, it is advisable to pick up boxes covered with a special protective layer, laminate - this way the life of your feeder will increase significantly!

Juice boxes are ideal (they are covered with a special moisture-proof layer both inside and outside), from small appliances, medium boxes from postal parcels, bright candy boxes. Even shoeboxes will do a great job with the functions of the feeder!

Candy box bird feeder

You will need:
Candy box (3 pcs.)
Two medium nylon twine or two shoelaces.

Insert one edge of the box into the other so that you get a triangle of three candy boxes connected to each other, as shown in the picture:

Pass the cord through the roof of the feeder, with the second cord securely attach your feeder to the tree.

candy box feeder

The feeder is ready, it remains only to fill in delicious grains and crumbs!

Even a child will cope with the manufacture of such a feeder (by the way, do not forget to involve children in this entertaining activity).

You will need:
Juice or milk box;
Long lace;
Knife or scissors.

Take an appropriately sized box and, using scissors or a knife, carefully cut a hole in the side of the box.

Through the top edge of the box, right in the middle, thread the string and fasten the “freshly prepared” feeder to the branch.

Hurry up and fill in the bird food - they have already discovered a new bird feeder and are eagerly waiting for your treat!

If you want to make a large enough feeder. To fit a whole flock of birds in it - take an ordinary postal parcel box! Glue the top carefully with adhesive tape, cut wide holes in the side moans, fix it on a tree - you're done! See what happened:

That's where there is a soul to turn around! There are a lot of plastic bottles of various shapes and colors around! There is a huge opportunity to show your creativity, invention, originality!

Let's take a closer look at the idea of ​​turning an ordinary plastic water bottle into a bird feeder.

We will need:

• Knife or scissors;
• Plastic bottle with a capacity of 5-6 liters;
• Wire;
• Bird food.

1. Using a knife or sharp scissors, carefully (so as not to cut yourself) cut a wide hole in a plastic bottle, located slightly above the bottom of the bottle (2-3 cm will be enough);

2. You can make several windows, one on each side.
3. Wrap the neck of the bottle with a strong wire and fasten the other end of the wire to a tree branch;
4. Lay plywood or a piece of linoleum on the bottom of the feeder, with their help we will make our feeder heavier and it will not sway and turn over with every breath of the breeze;
5. Pour in bird food and wait for your invited "guests"!

Plastic bottle feeder with spoons

Let's say that you want to make a small compact plastic feeder, then take a 1.5-2 liter plastic bottle!

You will need the following materials:
1.5-2 liter plastic bottle;
Wire;
Sharp knife or scissors;
Two wooden spoons for coasters;
Bird food.

Step-by-step instruction:
1. Take a plastic bottle with a capacity of 2 liters, measure 15 cm from the bottom of the bottle with a ruler and make a through hole for a wooden spoon at this height in the very center of the bottle;
2. Rise even higher (approximately to the middle of the bottle) and make another through hole for the second spoon. Only at a different angle (perpendicular to existing holes);
3. Insert through the spoon bottle;
4. Enlarge the hole on the wide side of the spoon - the grains will spill out and it will be convenient for the birds to peck them;
5. Pour the bird food into the bottle;
6. Tie the neck of the bottle with wire and attach it securely to the branches of the tree.
The feeder is ready! In a few minutes, birds wishing to treat themselves will visit it.

Another option for a plastic bottle feeder, more simplified:

We use the same materials as for the feeder with spoons. But now we don’t need spoons, but instead prepare electrical tape.

So, in a two-liter bottle we cut a large hole at a height of 5-7 cm from the bottom of the bottle. In order to make it convenient for the birds to sit on the cut edges of the bottle, we paste over the cuts with electrical tape or tape (your choice). We wrap the wire around the neck of the bottle and fasten it to a tree branch. Pour food - you're done!

DIY wooden bird feeder

We have already considered quite a lot of different options for bird feeders, made from all kinds of improvised means and even waste. It will not be right at all if a reliable and durable wooden feeder is left without attention - these are the feeders that hung on the trees in our childhood. It was them who were taught to make us at labor lessons by our Trudoviks!

Recall the manufacturing technology and - for business!

First, let's get creative and draw a little! Armed with a piece of paper and a pencil, draw the feeder you plan to make. Seeing it on paper. Estimate the dimensions of the future bird "dining room". Only after that you can start making the feeder.

As an option - use the ready-made drawings, which are presented at the very beginning of this article. The dimensions are already indicated there, the contours are clearly outlined - you can safely proceed to the next events.

To make a wooden feeder, you will definitely need the following tools:
1. Hacksaw;
2. Hammer;
3. Nails.
Prepare the following materials in advance:
Plywood of the right size;
Bars 2x2 cm;
Thin wooden board for the base of the feeder.

We go strictly by size! Dimensions are shown on the drawing.

1. From thin wooden board(solid) cut out a rectangular base of the desired size;
2. Now go to the plywood sheet and cut out a rectangle of the same size as the base - this plywood sheet will serve as the roof of your feeder;
3. We cut the bar into four parts, and one pair of bars should be 3 cm shorter than the first pair. Thanks to this design, the water will flow smoothly over the roof of the feeder and not stagnate on it - the roof will last much longer!
4. We retreat 1-1.5 cm from each edge of the feeder and nail the racks, first to the base of the feeder. And then we nail the roof to the racks. The front struts should be shorter than the rear;
5. We nail a wire or a strong nylon cord to the middle of the roof and fix the feeder on the tree.
All! The work is done, we pour the food, and admire the fun bird feast! Don't forget to take pictures - the memory will last a lifetime. There will be something to show to the grandchildren and what to make together with them!
In no case do we paint the feeder with paint or varnish - the birds do not tolerate such smells and will not visit the painted feeder with their presence!

What food is good for birds, and what, on the contrary, can harm them?
Feeding birds is a laudable occupation, but it is worth knowing that not all food is suitable for birds to eat! One food can provoke a disease of a gullible and hungry flyer, another can lead to the death of a bird, but the third one will definitely help a bird survive in a cold and hungry press and live until the long-awaited spring!

So, what can not be given to birds for food:

• Crumbs from fresh white bread;
• Crumbs from rye bread;
  Skins of bananas and all kinds of citrus fruits;
  Cream pies, cakes;
  Crisps;
  Roasted and salted seeds;
  Cereals;
  Nuts.

What can and should be treated to birds:

• Raw seeds;
• Buckwheat, millet, oats, millet;
• Crumbs and small pieces of stale white bread;
• Dried and cut into pieces fruits (dried fruits);
• Titmouse are very fond of small cubes of unsalted lard;
• For red-sided bullfinches, put mountain ash, viburnum in the feeder.

A few more photos of the original feeders:

Thanks to your attention and care in the winter period, there will be a real chance for more birds to survive, which, in turn, will definitely thank you later with their songs and "sanitary and health" work in your garden!

Watch also the video: Do-it-yourself bunker bird feeder in 10 minutes.