Where to distribute wi-fi on an iPhone. What are the possibilities for distributing LTE to other devices. Connecting a laptop to an iPhone Wi-Fi modem

AT modern world It is difficult to imagine a situation in which public place No Wi-Fi internet access point. It has become so commonplace that in any cafe, restaurant or mall you can easily connect to the Web and pass the time until late friends arrive or your spouse tries on another pair of shoes.

Nevertheless, according to the law of meanness, it can sometimes happen that you urgently need access to the Internet from a laptop or tablet, and you only have an iPhone that can access the Network via 3G or LTE, and there is no Wi-Fi access point nearby.

In this case, you can use our tips and turn your iPhone into a modem that distributes the Internet.

In order for the iPhone 6 to start distributing the Internet, go to "Settings" and first enable support for "3G" and "Cellular data", as well as "4G / LTE", if supported. In this case, the speed of the distributed Internet will be much higher.

In the event that there is no such item in the "Settings", we are in no hurry to get upset about the fact that something is wrong with your favorite “apple” smartphone, and go to the “ cellular" in settings".

All information about the cellular connection of the smartphone is displayed here, which can also be found on the website of the mobile operator whose SIM card is used in the smartphone.

In the new window that opens, three items will be displayed: APN, "Username" and "Password".

We go down the page and find the same item “Modem mode”. Next, here you will need to copy the data from all three items: APN, "Username" and "Password".

After the data is filled in, in the "Settings" under the "Cellular connection" tab, the menu item "Modem mode" will appear. If you go into it, the default slider will be switched to an inactive position, and under it there will be a brief instruction explaining what steps you need to take to make the iPhone work in modem mode that distributes the Internet via Wi-Fi.

Also in this section of the menu will be displayed the possibility of creating a password for a future Wi-Fi network. If you click on the “Wi-Fi Password” item, a new window will open with a pop-up keyboard that allows you to enter the desired secret access code with a length of at least 8 characters.

After these fairly simple manipulations, the iPhone turns into a modem that distributes Internet access via Wi-Fi to all receiving devices located nearby.

If all the manipulations were carried out correctly and the receiving device connected successfully (which will be indicated by the ability to access the Internet), a flashing message will appear on the distributing iPhone at the very top of the screen under the information line displaying the charge level, current time and Internet connection: “Mode modem - connections 1" (where 1 is the number of receiving devices, there may be several).

It is important to note that not only the iPhone 6 will cope with this task, but also earlier versions of the “apple” smartphone, starting with the iPhone running iOS 5. However, the longer the gadget acts as a modem, the faster its battery will run out. Also, the rate of battery discharge is affected by the number of receiving devices connected to the network. The more of them, the faster the distributing iPhone will be discharged.

Have you ever had a situation where you need to connect your computer or tablet to the internet without Wi-Fi nearby? If you have an iPhone with 3G or 4G internet connected, this problem can be easily solved thanks to hotspot mode.

It's easy to set up iPhone as Wi-Fi tethering mode, sharing your internet with anyone who's close enough and has a passcode. In this article we will tell and show how to distribute the Internet from an iPhone (X, 8, 7, 6, 5, 4) using Wi-Fi, bluetooth and USB cable, via modem mode.

Let's say you're traveling with your iPhone and MacBook or iPad with Wi-Fi and you want to watch a movie on your laptop. At this point, you have two options: watch a movie from your laptop, but it can't connect to Wi-Fi; and go online to watch a movie or listen to music, since there are no free wi-fi. But at the same time you are connected Mobile Internet on your iPhone.

Creating from your iPhone to a Wi-Fi hotspot (tethering mode), allows your laptop and tablet to connect to the internet via Wi-Fi.

It's easy to turn your iPhone into a WiFi hotspot, but you have to make sure you have enough bandwidth (some mobile operators may charge extra for tethering).

Hotspot mode has been hidden in new versions of iOS 8+, here's how to find it:

1. Click "Settings".
2. Click Cellular.
3. Tap Cellular Data Options.
4. Click Cellular Data Network.
5. Scroll down and find the tethering settings.

In the APN field enter: internet

Then follow these steps to enable hotspot mode:

1. Click "Settings".
2. Click Cellular.
3. Click "Tethering Mode".
4. Move the "Tethering Mode" slider to the "on"/"green" position.

On iOS 6 and earlier: Settings -> Network -> Personal hotspot (Tethering mode) -> move the slider to On.

You should now be able to surf the internet on your Wi-Fi-only MacBook or iPad using the connection provided by your iPhone.

If you don't have a Wi-Fi icon in your Mac's menu bar, open System Preferences and click Network. Select Wi-Fi from the list on the left. Select an iPhone hotspot from the Network Name drop-down menu.

When you're done, tap Settings > Mobile > Personal Hotspot on your iPhone and set it to Off.

If you don't have Wi-Fi, Bluetooth, or both turned off, when you turn on hotspot mode, a pop-up asks if you want to turn them on or use USB only.

Read also:

If you do not understand what to do, watch the video:

⚠️How to share internet from iPhone? Lost modem mode

How to create a hotspot on iPhone? (wifi hostpost)

There is another way to enable hotspot mode on your iPhone: Continuity (Handoff). This is a feature of Apple devices that the company introduced with iOS 8 and Mac OS X 10.10 (or Yosemite). It allows Apple devices to work together when they are nearby and share features and control each other.

Personal hotspot is one of the functions that can be controlled on Apple products. Here's how it works:

1. If your iPhone and Mac are next to each other and you want to turn on hotspot mode, click the Wi-Fi menu on your Mac.
2. In this menu, under Personal Hotspots, you'll see the name of the iPhone (assuming Wi-Fi and Bluetooth are enabled on the iPhone).
3. Click on the name of the iPhone, tethering mode will be enabled and the Mac will connect to it without touching the iPhone.

How other devices connect to Wi-Fi

Connecting other devices to your personal Hotspot via Wi-Fi is easy. Tell people who want to connect to turn on Wi-Fi on their devices and search for your phone's name. They must select your network and enter the passcode shown on the iPhone screen.

How do you know when devices are connected to your personal hotspot?

When other devices are connected to your iPhone's hotspot, you'll see a blue bar at the top of the screen. In iOS 7 and above, the blue bar displays a number next to the lock icon, which lets you know how many devices are connected to your phone.

Sharing Internet from iPhone via USB is the easiest way to connect your phone. As long as you have tethering enabled, all you need to do is connect your phone with a USB cable.

On the Windows network adapters, we see that we are connected via "Apple Mobile Device Ethernet".

On our Mac, we can see in the network settings that our iPhone is connected via a USB connection.

How to share Internet from iPhone via Bluetooth in Windows

Wi-Fi and USB are faster than Bluetooth, but if you prefer to use Bluetooth to connect to your WiFi hotspot, you can do it like this.

1. To connect a Windows computer via Bluetooth, first click the Bluetooth icon on the taskbar and select "Join Wi-Fi".

2. Then click "Add Device" in the top left corner.

4. Like any other Bluetooth connection, you will be shown a pair code (Pari) on your computer and your iPhone. Compare the two passcodes, and if they're the same, tap "Pair" on your iPhone screen and "Yes" on the Windows pair screen.

5. Let your Windows computer install the required files on your system.

6. Once you're done, you can right-click on your iPhone to connect it as a hotspot (in tethering mode). You are now ready to surf the internet, check email, chat, etc.

How to Share Internet from iPhone via Bluetooth on Mac

1. On a Mac, open System Preferences > Bluetooth, find your iPhone in the list, and click Pair next to your iPhone.

2. You will be shown the pairing code on your Mac screen and on your iPhone.

3. If the codes match, press the "Pair" button to confirm the connection.

4. Now from the Mac menu bar, click the Bluetooth icon, highlight your iPhone in the list, and click Connect to Network.

5. You should now be able to access the Internet through the iPhone's Bluetooth connection. When you want to disconnect, tap Bluetooth again, select your iPhone and then "Disconnect from network".

What is the best method for sharing internet on iPhone?

Of all the methods, USB is the fastest, but inconvenient, requiring your iPhone to be physically connected to your computer. However, it is very easy to set up.

Using and running some basic benchmarks, we saw speeds of 3.7Mbps, 4.3x faster, with a ping time of 60ms.

Bluetooth is more secure than Wi-Fi, but the slowest of the three, also requiring configuration, although once that's done, you don't have to worry about it anymore.

We saw speeds around 0.8Mbps and 60ms ping.

Wi-Fi will be the most popular connection method, but is not secure unless you use a complex password, so make sure you set it up at all, or your traffic could be exhausted quickly. It's also very easy to connect to it, you only need to enter the password once and almost as fast as USB.

Overall, the speed for our Wi-Fi hotspot was 3.7Mbps, 2.7Mbps, and 30ms.

With that said, if you don't want to tether your phone to your computer with a USB cable (which gives you additional advantage to charge the battery), Wi-Fi is definitely the clear choice for tethering. There is little reason to choose Bluetooth because of its slow speed, unless of course that is your only choice - for example, if your wifi adapter broke and you can't find the usb cable.

How to set up tethering mode on iPhone?

What if someone is trying to hack your connection by wasting your bandwidth?

You need to take it easy because the iPhone hotspot is password protected. (Especially don't select the word "password" or anything else that's easy to guess.) And you'll see a little notification at the top of your iPhone screen when a device connects to your hotspot, so you'll get a warning if someone in your train car will be able to guess your password.

A more important warning concerns traffic limits for your own surfing. We recommend avoiding downloading large applications and files.

One important thing to remember is that unlike normal Wi-Fi, your personal hotspot uses data from your tariff plan iPhone data, which offers a limited amount of data. Your monthly data plan can be used up quickly if you watch videos or download large files.

iPhone as Wi-Fi and USB tethering

First, let's define the following expressions:
- distribute Wi-Fi on the iPhone, in other words,
- use iPhone as a modem,
- iPhone as a Wi-Fi hotspot,
- iPhone as a Wi-Fi router
essentially mean the same thing.

More precisely, the iPhone distributes Wi-Fi, after which a laptop, computer or other gadget can access the Internet using this Wi-Fi.

In fairness, we must immediately say that Wi-Fi can be distributed not only from an iPhone, but also from a smartphone on Android, more details.

First of all, we check the quality of the Internet on the iPhone for the possibility WiFi sharing.

Why sometimes the iPhone does not distribute Wi-Fi

Before distributing Wi-Fi on an iPhone, you need to make sure that the cellular operator is able to provide Internet access. Screenshots are for iPhone 5.

On fig. 1 shows where you can see the quality of the Internet connection using an iPhone.

Rice. 1. The quality of the iPhone connection to the Internet

If in the top line on the smartphone screen next to the name of the mobile operator there is an inscription LTE (as in Fig. 1) or 3G, then an Internet connection is possible and you can use an iPhone to distribute Wi-Fi.

If there is no inscription or the letter E is, then you can NOT even try to connect, it still won’t work, the iPhone will not help.

How to distribute Wi-Fi on iPhone

At good quality Internet connection, you can create an access point. To do this, go to "Settings" (this icon is highlighted in red in Fig. 1).

Going to "Settings", click on the option "Modem mode" (Fig. 2). This is the mode that "turns" our iPhone into a device for distributing the Internet, into a modem, or, if you like,.

Rice. 2. Turning on the modem (router) mode, in which the iPhone will become a Wi-Fi access point for other gadgets, computers, laptops

When you turn on the modem mode for the first time, you need to set a password with which our other devices (computer, laptop, other) will connect to the iPhone as a Wi-Fi access point. To do this, click on the inscription "Wi-Fi Password" (Fig. 3):

Rice. 3. Entering or correcting a password with which other gadgets, computers, laptops can connect to the access point, i.e. to our iPhone

The next time you turn on the modem mode, the password no longer needs to be entered in the iPhone. This password will remain so until the user wishes to change it.

Reasons for changing your password may include:

• unauthorized connections of "foreign" gadgets, laptops, computers to WiFi networks distributed by iPhone;
• transferring the password to third parties, for example, at their request to urgently connect to the Internet using your iPhone.

That is, the password must be changed if it has become known to unauthorized persons.

The password is entered in the password entry field (number 1 in Fig. 4). It must consist of Latin letters (large and small), as well as numbers.

Rice. 4. Entering a password to connect to an access point created using an iPhone

It is advisable to make the password long, about 10-15-20 characters, so that it is not easy to pick it up for those who want to connect to your access point, to your iPhone “for free”. After entering the password, you need to click on "Finish" (number 2 in Fig. 4) to complete the action.

So, if the password is entered, you can turn on the modem mode, and thus turn the iPhone into a Wi-Fi access point. To do this, switch the "Modem mode" switch to the "On" position (green color of the switch in Fig. 5).

Rice. 5. Enabling modem mode through iPhone (i.e. mode WiFi router)

In order for the distribution of Wi-Fi on the iPhone to take place, you also need to turn on the Wi-Fi switch. The iPhone automatically offers to do this when you turn on the modem mode (Fig. 6).

Rice. 6. Automatic offer in iPhone to turn on Wi-Fi and, at the same time, BlueTooth to turn on modem mode (or Wi-Fi router)

If, before turning on the modem mode, you first manually turn on Wi-Fi in the iPhone, then such an offer will not be received, because at the time the modem mode is turned on, Wi-Fi will already be enabled on the iPhone.

Connecting a laptop to an iPhone Wi-Fi modem

Now that the iPhone has become an access point to the Internet, when it distributes Wi-Fi, you can connect, say, a laptop to it. Consider how to do this using the example of a laptop with Windows 8.

To connect to Wi-Fi coming from an iPhone, you must first click on the Wi-Fi icon in the laptop taskbar (lower right corner of the screen), as shown in fig. 7.

Rice. 7. Starting a connection to a Wi-Fi network originating from an iPhone in modem mode, in Wi-Fi sharing mode

There will be offers to connect to different networks, among which you need to choose the one that is created by our iPhone. As a rule, the word iPhone will be in the name of this network. In our version, this is the iPhone MacAir. We click on it to connect (Fig. 8).

Rice. 8. Selecting a Wi-Fi network named IPhone MacAir on a laptop to connect to it

This checkbox will save us from the need to perform any actions the next time we connect the laptop to an iPhone operating in modem mode. The laptop will connect to this network completely automatically! Here is the price of this checkbox, this is the price of the subsequent doing nothing and full automatic connection.

Rice. 9. Setting up an automatic connection to an iPhone via a Wi-Fi network and then connecting the laptop to this network

The first time you connect a laptop to an iPhone that distributes Wi-Fi, you will have to enter a password to connect. Yes, yes, the same password that was entered in the iPhone when you first set it up in modem mode.

The password on the laptop is entered in the "Enter the network security key" field (number 1 in Fig. 10).

Rice. 10. Entering a password to securely connect to a Wi-Fi network distributed by an iPhone

The “eyes” icon (number 2 in Fig. 10) allows you to briefly see the password that is being entered. As long as the mouse cursor is on this “eye” and the left mouse button is pressed, the password is fully visible in the input window. As soon as you release the left mouse button or move from the "eye", the password turns into a set of dots, becomes invisible to outsiders.

After entering the password, you need to click on the "Next" button (number 3 in Fig. 10).

When you first connect to the access point, which we temporarily turned the iPhone into, you need to indicate on the laptop that we are connecting to a public network.

Why?
- Because we get the Internet from the iPhone, and he, in turn, receives it from the mobile operator. A great number of users are connected to the cellular operator, this is a public network, not a home network. Therefore, we indicate that we do not want to enable sharing of our gadgets, computers, laptops that will access the Internet using an iPhone. We don't want to join! (Fig. 11)

Rice. 11. Refusal to turn on sharing when connecting to the Internet through a hotspot using an iPhone

After all the above steps, our laptop will be connected to Wi-Fi via an iPhone, which will act as an access point.

The inscription “Enabled” will appear next to the name of the Wi-Fi network with the name of our iPhone (Fig. 12).

Rice. 12. Informing about the connection to Wi-Fi, the source of which is the iPhone

We will also be informed about this by the Wi-Fi network icon in the taskbar in the lower right corner of the monitor screen, if you move the mouse cursor to this icon (Fig. 13).

Rice. 13. Informing in the taskbar about connecting to the Internet, which is available via a Wi-Fi network coming from the iPhone

And an inscription will appear on the iPhone indicating that one external device is connected to it (circled in a red frame in Fig. 14):

Rice. 14. Informing on the active iPhone screen about the connection of one external device (in this case, a laptop) via a Wi-Fi network

If the iPhone is not active, then on the screen you can also see a small icon about connecting one or more external devices to the iPhone via Wi-Fi (Fig. 15).

Rice. 15. Informing on the NOT active iPhone screen about the connection of one external device (in this case, a laptop) via a Wi-Fi network

Disconnecting a laptop from an iPhone-based Wi-Fi modem

Sooner or later, you will have to disconnect from the Wi-Fi network that the iPhone provides us with.

To do this, click again on the Wi-Fi network icon in the taskbar in the lower right corner of the monitor screen (Fig. 13).

And again the name of our network will appear with the name iPhone with information about connecting to this network and even with information about the connection security system, if you move the mouse cursor over the name of the network (Fig. 16). By the name of this network, you need to click to start the procedure for disconnecting from the Wi-Fi that our iPhone distributes.

Rice. 16. Click on the name of the Wi-Fi network to disconnect the laptop from it

You will be prompted to disconnect from the Wi-Fi network, the "Disconnect" button will appear, which you should click on (Fig. 17)

Rice. 17. The button to disconnect from the Wi-Fi network that the iPhone distributes

As a result, the laptop will be disconnected from the Wi-Fi network, and the “Connected” inscription will disappear (empty field shown as number 1 in Fig. 18).

Rice. 18. Informing that the laptop is disconnected from Wi-Fi, since there is no “Connected” inscription. The field where the inscription was located is empty.

Turn off tethering on iPhone

When all subscribers (gadgets, computers, laptops, etc.) are disconnected from the iPhone operating in Wi-Fi distribution mode, then you should disconnect the iPhone from modem mode. You need to turn off the Internet access point on it.

To do this, it is enough to switch the “Modem mode” slider to the “Off” state when the switch turns not green, but plain white (number 1 in Fig. 19). After that, you need to return to the iPhone settings by clicking on the inscription "Settings" (number 2 in Fig. 19), since the access point has not yet been disabled.

Rice. 19. Turn off tethering on iPhone and go back to Settings to turn off Wi-Fi and BlueTooth

And now on the iPhone you need to turn it off (Fig. 20).

Rice. 20. Disabling BlueTooth on iPhone (click on "BlueTooth" in Settings, turn off the engine and return to settings)

Then you need to turn off Wi-Fi on the iPhone in the same way (Fig. 21).

Rice. 21. Turn off Wi-Fi on iPhone (click on "BlueTooth" in Settings, turn off the engine and return to settings)

Now that's it, no one else will connect to our iPhone until the next access point is turned on on it.

Controlling traffic consumption on iPhone when working in Wi-Fi distribution mode

Our iPhone distributes Wi-Fi for a reason. He spends his traffic, which he receives from the mobile operator. As a rule, cellular communication has restrictions on the amount of traffic. It can be 1GB per month, 3GB per month, 5GB or more. It all depends on the plan and additional services that need to be paid.

And if you pay, then you need to control it so that you don’t use up all the traffic intended for work for a whole month ahead of time.

It is especially important to control traffic if the iPhone distributes Wi-Fi and at the same time works in modem mode (in Wi-Fi router mode). After all, it is enough to watch a short movie on a laptop or computer connected to an iPhone, how the traffic can end.

You need to be careful and careful when using the Wi-Fi that the iPhone distributes. This traffic, I repeat, has a limited amount, not so large as to recklessly and in one session spend all the gigabytes provided by the cellular operator.

Traffic control in iPhone is carried out in Settings - the "Cellular connection" option (Fig. 22):

Rice. 22. Control traffic using the "Cellular" option in iPhone settings

On the Cellular page, you can see

• the total amount of traffic for the last month (the number next to the inscription "Current period" in Fig. 23)
• and for the same period, traffic is shown when the owner of the iPhone is roaming (the number next to the inscription "Current roaming period" in Fig. 23).

Rice. 23. Where to see the consumption of Internet traffic provided by a cellular operator in the home network and in roaming

Roaming should always be zero! Internet in roaming is expensive, sometimes very expensive, especially when you are abroad.

It is necessary to prohibit your iPhone from accessing the Internet while roaming. And in the home network, the value of the consumed gigabytes must be less than that provided for by the tariff, otherwise access to the Internet will be terminated automatically, or payments for access to the Internet will increase sharply.

But in fig. 23 we see all the traffic. And how to determine how much we spent gigabytes (megabytes), including iPhone in modem mode, in Wi-Fi router mode? To do this, scroll down the page “Cellular communication to the very bottom.

There we can see, firstly, the amount of traffic consumed by iPhone system services (number 1 in Fig. 24). This is almost the consumption of traffic in modem mode, but not quite yet. And also here at the bottom of the page on the last day of the calendar month, we can reset traffic consumption statistics so that the system starts counting traffic again and gives us values ​​from the beginning of the next month to its very end (number 2 in Fig. 24).

Rice. 24. Traffic consumed by iPhone system services, as well as a button to reset traffic consumption statistics

By clicking on "System Services" (number 1 in Fig. 24), we can finally see the traffic that was consumed by the iPhone while it was working in modem mode this month (Fig. 25).

Rice. 25. Controlling the traffic consumed by the iPhone when working in Wi-Fi router mode, in modem mode

Here, in fact, are all the “secrets” of how to use an iPhone if you need it in Wi-Fi distribution mode.

If you have any questions, please ask them in the comments below. My answer will come to you by mail.

Today, in almost any restaurant, cafe or entertainment center You can connect to the Internet for free through a wifi hotspot. However, sometimes there are situations when, for some reason, there is no access to the network in a public place. If you have a laptop or smartphone from Apple iPhone, you can work around this problem. This phone can connect to the Internet using 3G or LTE standards.

Sharing Internet from iPhone

To activate the ability to distribute on an Apple smartphone wifi internet you must first enter the settings and enable "3G", "Cellular data" and "4G / LTE" if such a standard is supported by the phone model. This format will make it possible to transfer data much faster.

After that, select the menu item "Modem mode" and activate this setting. Now the iPhone smartphone will be able to distribute internet via wifi. This is achieved by allowing the phone to act as a modem for wireless communication. If there is no such item as “Modem mode” in the smartphone settings menu, then you need to enter the “Cellular connection” section. Here you can see all the settings that phones use to use the mobile Internet. Similar information is also available on the official page of each mobile operator whose SIM card is installed in the device.

Here the owner of the smartphone will see three lines, namely: "APN", "Username" and "Password". Further below is the item "Modem Mode". You must select this part of the menu and copy here the information from the lines "APN", "Username" and "Password".

After entering this information, under the line "Cellular" in the previous section of the phone settings, the inscription "Tethering mode" should also appear. By default, this option is in the disabled position. The user needs to move the slider and thereby .

It will be by the way to say that under the line for enabling the phone's mode of operation as a modem, you can see a brief instruction on setting up the distribution of mobile Internet by a device via wifi.

In addition, in this part of the settings, you can set a password to connect to the wifi network of other devices. To do this, select the line "Wi-Fi Password" and in the window that opens, enter a combination of eight characters using the graphic keyboard.

Upon completion of these simple manipulations, the iPhone smartphone will switch to modem mode and will be able to provide Internet access to other devices connected via wifi to this unit. To join the established network, the user of another phone, tablet or computer will need to select the required connection in the settings and enter the password set by the owner of the iPhone.

If the creation of a new network was done as expected and other devices manage to connect to the Internet via iPhone, then a flickering notification will appear in the upper corner of the phone screen near the information about the device’s charge level, time and Internet connection: “Tethering mode - connections 1”. Here, the number one indicates the number of devices that use the Internet of the distributing iPhone.

Additional Information

By the way, it will be worth emphasizing that not only the latest model of the Apple iPhone 6 smartphone, but also earlier versions of these devices have the ability to create a public network and distribute the Internet. The main condition for this is the presence in the device operating system, starting from iOS 5. At the same time, it should be noted that the battery of a smartphone distributing internet via wifi is discharged the faster the longer it works in modem mode. At the same time, the number of connected receiving devices also affects the rate of battery drain.

With the onset of summer, almost all people move from stuffy offices and concrete apartments to nature. However, no one wants to give up the Internet, especially the owners of "apple" products. Fortunately, the modern iPhone can be used as a hotspot in order to enjoy your favorite sites on multiple devices at once.

Although this option is available and quite easy to connect, many do not know how to distribute the Internet from an iPhone 7 and subsequent models. In fact, there is nothing complicated in this. To share a wireless network signal, you do not have to resort to any tricks or connect additional devices to your phone.

How to share internet from iphone 7

It is worth saying that you can share the Network signal from any iPhone that has the appropriate module installed. In this case, the device, of course, must be connected to the mobile Internet.

However, it is worth considering that when you connect additional devices, the traffic will begin to increase exponentially. Therefore, when wondering how to distribute the Internet from an iPhone 7, you should first make sure that the phone is using unlimited tariff mobile Internet. Otherwise, the costs will be huge.

In order to turn your favorite iPhone into a travel modem, you must first enable the "Cellular Data" options and activate the "3G / 4G LTE" function. To do this, follow these steps:

• Go to phone settings and select "Cellular".
• Enable "Modem mode". In some cases, it may be necessary to additionally activate Bluetooth.
• When a message about activating the modem mode appears on the screen, all that remains is to enter the Wi-Fi password.

It's best to come up with a complex wireless access code, especially if your phone doesn't have an unlimited data plan. Otherwise, anyone can connect to the access point.

This is the easiest way to share the Internet from an iPhone 7. After activation, you can visit your favorite sites from any device running on Android or Windows. However, this is not the only way to access the network.

How to distribute mobile Internet from iPhone 7 via USB?

For this method, you will need to purchase the appropriate cable. Use it to connect your phone to your laptop. After that, you need to go to the control panel of your laptop and find "Network and Internet". In this section, you need to go to "View network status" and check if the connection has been activated. In turn, in the phone's modem mode settings, you must check the box next to "USB only".

This method also answers the question - how to distribute the Internet through an iPhone 7. However, it should be borne in mind that in this case the connection speed will be much lower. Therefore, it will be very difficult to watch a movie or play.

On the other hand, the phone will constantly be on recharging.

How to distribute the Internet via Bluetooth?

In this case, you also need to link the iPhone to the PC. Only in this case, not a cable is used, but Bluetooth. After connecting, do the following:

• Specify the code (will be displayed on the iPhone) that is required in order to activate the "Create a pair" option.
• Connect from PC to phone and wait until "Modem mode" appears on the latter.

If everything is done correctly, the gadget will start working as an access point. This will allow you to use it normally.

Cellular provider APN settings

In order for everything to work correctly, you need to connect the mobile Internet. Then perform a few more manipulations. More precisely, you need to set up an Internet connection. To do this, just go to the gadget settings and find the "Cellular connection" section. If the APN setting is not performed automatically, then you need to do it manually. To do this, select "Cellular data network". Further, it all depends on the mobile operator:

• "Megaphone". In this case, you must specify "internet" in the APN field. The password and username fields do not need to be filled in.
• "Beeline". To activate the distribution of the Internet, "internet.beeline.ru" is indicated as the APN. The username is simply beeline.
• MTS. In this case, you need to specify "internet.mts.ru" in the APN field, and enter mts as the user and password.

Why is the internet not working?

Some users often face a similar problem. However, before you start to panic and wonder why the iPhone 7 is not distributing the Internet, you need to make sure that all the settings have been made correctly.

It is possible that the device simply has not been switched to modem mode. In this case, it will be impossible to distribute the Internet.

Another common mistake is that when you connect the gadget to the computer, it turns out that an outdated version of iTunes is installed on the phone. In order to solve this problem, it is enough to install current version Software, then reboot the device.

Also, the reasons for a non-working modem can be more trivial. It is possible that the device simply does not have the required module.

In most cases, the phone starts distributing the Internet immediately after activating the necessary options. Additional settings are usually not needed.

Finally

Knowing how to distribute the Internet from an iPhone 7 plus and on other models of "apple" products, you can enjoy the benefits of the global Web in any conditions. If the signal is working properly, and all the settings have been made correctly, then many different devices can be connected to the iPhone. However, you should not forget about the security of the network. It is best to come up with a password that will contain not only numbers, but also letters written in different registers. This will not only protect against freeloaders, but also from scammers who can hack mail or get other data from the phone.