Scientific laboratories of the Polytechnic Museum. Moscow Polytechnic University - laboratories of the Department of Polytechnical Laboratories

Department "Technology of mechanical engineering them. F.S. Demyanuk"
Department laboratories

Department "Technology of mechanical engineering them. F.S. Demyanyuka" has a modern material and technical base sufficient for high-quality training of specialists and conducting scientific and research work. The total area of ​​educational, scientific, economic premises of the department is about 1000 sq.m., where educational and scientific laboratories of the department are located. Head of the department prof. Shandrov B.V. Head of the laboratory "Technology of mechanical engineering", senior lecturer Mishin V.N.

Laboratory work on a CNC milling and drilling machine. Senior teacher Mishin V.N.

Laboratory "Electrophysical and electrochemical processing methods". (supervisor prof. Morgunov Yu.A., lecturer associate professor, candidate of technical sciences Ovsyannikov B.L., head of the laboratory associate professor Filippov V.V.)

Laboratory work on the electroerosive machine.

Rapid Prototyping Lab. Product design using rapid prototyping.

Laboratory work on the creation and editing of an electronic model for prototyping a product and its manufacture on a 3D printer in the student group of the training direction 15.03.01 "Mechanical Engineering" ("Machines and Technologies for Highly Efficient Machining Processes").

Laboratory work on the processing and measurement of small parts made of difficult-to-machine materials

on electroerosive and ultrasonic machines.

EDM machine for piercing small diameter holes.

Protective Coatings Laboratory(supervisor prof. Morgunov Yu.A., teacher associate professor, Ph.D. Ovsyannikov B.L., head of the laboratory associate professor Filippov V.V.) has an experimental installation for applying anti-corrosion and protective coatings on the surface of machine parts microarc oxidation method.

Firmware EDM machine with an electrode of complex shape and a product.

Laboratory work on lathe with CNC. (Associate Professor, Ph.D. Kuzminsky D.L.)

Laboratory work on a CNC milling and drilling center.

Automation Lab technological processes (head prof. Vartanov M.V.) has a robotic technological complex, the device "VIBRON" for vibration diagnostics of gear cutting processes, a vibratory hopper loading device, an assembly machine for assembling threaded connections, an automated stand for checking the tightness of products after assembly.

Laboratory for the development of a cyclogram of an assembly robot.

Programming Lab industrial robot(Associate Professor, Ph.D. Zinina I.N.)

Technological equipment laboratory(Head Associate Professor Bulavin I.A.) has special training stands for studying various machine tools in the operating mode. The laboratory is equipped with visual aids, a multimedia projector, and a video library.

Study of the relationship between force factors and geometry parameters

in a lathe lever-cam chuck (associate professor, Ph.D. Bulavin I.A.)

Laboratory work on the discipline "Technological equipment".

Investigation of the relationship between force factors and geometry parameters in turning wedge collet mandrels

(Associate Professor, Ph.D. Bolotina E.M.)

Classes in the laboratory "Technological equipment".

Laboratory of Computer-Aided Design of Technological Processes- CAD TP (head of the laboratory, graduate student Mishchenko R.S., scientific supervisor prof. Strzhemechny M.M., lecturer, associate professor, Ph.D. Zinina I.N.) has 20 personal computers, combined in local network with Internet access and allowing students to work with licensed software packages CAD / CAM / CAE / PDM Catia V5, NX 7.5 Simens, Prilud, Matra Datavishon, two plotters and a printer to perform the graphic part of graduation papers. The network has peripheral computers for the implementation of work programs on CNC machines in the laboratory of mechanical engineering technology. On the basis of the laboratory there is a student circle "Digital design of manufacturing processes".

Laboratory work on the discipline of CAD TP. Creation electronic models in Catia V5 software.

computer class to study the discipline "Computer-aided design of technological processes"

(Associate Professor, Ph.D. Zinina I.N.)

The department operates NPP "Autotechnology" for the production of engine pistons using high technology, patented in a number of foreign countries. This enterprise has more than 20 pieces of equipment, a design bureau, is located on an area of ​​250 sq.m and is used for students' technological practice. The company employs teachers, training masters, graduate students and students of the department.

Milling and boring machining center in the laboratory of the department.

Specialized audience for studying various disciplines using

multimedia educational technologies and interactive learning.

Laboratory stand for studying the conditions of automated assembly of parts using vibration devices

(head professor, doctor of technical sciences Vartanov M.V.)

Practical training in the discipline "Technology of automated assembly"

Conducted by Professor, Doctor of Technical Sciences. M.V. Vartanov

Robotic complex for adaptive assembly.

In the specialized laboratory "Technological equipment" during research work to improve the technological processes of assembling gearboxes. (Head prof., Doctor of Technical Sciences Shandrov B.V. and Associate Professor, Ph.D. Bulavin I.A.)

Experimental bench for adjusting the bearing preload in gearboxes of KAMAZ vehicles.

Laboratory work on a hardness tester.

Laboratory work - the study of surface roughness after various methods processing.

Laboratory work on a round gauge - the study of shape errors of parts after machining. Discipline - "Technological quality assurance", lecturer, associate professor, Ph.D. Bulavin I.A.

The laboratory base of the department meets the requirements for the practical training of young specialists in the areas of "Mechanical Engineering", "Design and Technological Support for Machine-Building Industries" and "Design of Technological Machines and Complexes".

, University of children , vacation camps.

The scientific laboratories of the Polytechnic Museum are scientific centers, in which children from 6 to 18 years old acquire their first experience of serious research. The circle programs do not duplicate school courses, the focus is on the experimental side of science. In the classroom, you can try yourself in various scientific disciplines, get acquainted with the professions of a chemist, doctor, physicist, mathematician, and even a cryptographer.

Yes, on mug of the Laboratory of Chemistry "Delicious experiments" children will conduct chemical and physical experiments with baking soda, table salt, acetic acid, egg white, but in special dishes - in test tubes and flasks.

BUT Robotics Laboratory has prepared a very serious 3D design class for its students, where students will master the full potential of the 123D Design program to create their own parts, useful objects and even entire robots, as well as learn how to work with 3D printers and print their own parts.

The Laboratory also offers classes for students in grades 5-7 "Visual Programming", where students immerse themselves in the world of algorithms, bypassing the complexities inherent in classical programming languages ​​and begin to implement complex behavior algorithms on robots.

In addition to the circles that have already become traditional, the Robotics Laboratory has launched new course "Electronics". In the classroom, children will learn how to solder, assemble electronic circuits, as well as make your own devices three different ways. The guys will assemble and take with them design schemes, such as a "radio bug", "light and music instrument", "controlled flashlight".

Laboratory of Mathematics will launch several new circles at once. At "Geometry" students will be able to develop their spatial thinking, get acquainted with geometric methods of cognition, form general ideas about space and about the relationships between its elements. On the mug "How to reinvent the wheel" students will be told where the calendar came from and how it works, who invented fractions and how they were recorded by the ancient sages, and much more. The course contains many practical tasks from the history of human development, and their solutions.

Biology Laboratory, which is headed by the well-known popularizer of science Ilya Kolmanovsky, will open the “Microscope and I” circle: children will learn how to work with a microscope, make preparations and stain them on their own. BUT Physics Laboratory It will help to study the laws of mechanics, to construct various devices with your own hands, illustrating not only these laws, but also the principle of operation of electricity.

Finally, new season opens and Children's lecture hall"Hack Your Brain: Cognitive Science in Experiments" series of classes. On the theoretical part, students will learn how thinking, imagination, memory, sensations, perception and attention work, and on the practical part, they will try to create their own illusions and learn to better concentrate and remember using science-based life hacks.

You can sign up for classes by filling out the form on the website.

All classes take place on site. cultural center ZIL.