Machine tool kds 3 1967 specifications

24.11.2019

Circular saw (circular) machine, designed for deep processing of logs in order to obtain lumber in the form of beams and boards (edged and unedged), working on slabs and thinner. Lightweight and budgetary circular sawmill KDS - 1100 Main line with a cutting height of 420 mm and a capacity of up to 25 m3 / shift. The sawmill does not require a foundation, it can work as an independent unit, or as part of a production line as a first-line machine. Location of the machine in enclosed spaces or under a canopy at temperatures from -20° to +40°C and relative humidity up to 80%.

Options, descriptions

Basic equipment of the machine

Steel rigid three-section frame with divider and riving knife;
guide rollers;
Table with chain drive and log clamp;
saw shaft;
Mechanical measuring device;
Hydromechanical clamping device;
Hydraulic system
The main drive equipped with el. engine and V-belt drives;
Built-in aspiration system;
Electric control cabinet;
Remote Control;
Protective devices, fences and spare parts
Saw blade Ø1100

Price for technical documentation KDS-4 depends on the manufacturer and year of manufacture, as well as the form of delivery and payment. To clarify your price with maximum discounts, please make a request on this site and we will answer you as soon as possible. Or contact our managers by phone or e-mail.

Description of the passport and manual for KDS-4

Here is the technical passport for the KDS-4 machine.
On this page you can download a demo version, make an application and get acquainted with additional information this documentation.
Documentation of KDS-4 is fully checked by professionals and prepared for delivery in the shortest possible time.

Completeness of the data sheet:
This passport is 100% complete and contains all the necessary sections and volumes.
Scheme of the KDS-4 machine must also be included.
electrical equipment section, contains a description and all diagrams, including principal and kinematic.
Operation manual for KDS-4 and all contents of the mechanics and hydraulics section.

Order and download passport KDS-4, you can from our website.
Make an application for this passport on this page and we will send you a complete answer within 60 minutes.
You can also contact our office by any phone, send a fax or write an e-mail.
You can receive and download this passport in the shortest possible time.
All information is presented on this site, if something causes difficulties or doubts for you, please contact our managers.

How to order

To order this manual for your machine, use one of these ways to contact us:

We will respond to your request within an hour, and by phone you can get
information immediately

Information about the manufacturer of the combined woodworking machine BDS-4

Manufacturer of universal grinding machine BDS-4 - Vitebsk plant of grinding machines Visas founded in 1897.

Since 1940, the company has been specializing in the production of grinding equipment and today is the only manufacturer of machine tools in the CIS for the manufacture and sharpening of any cutting tool. The plant's products are used in more than sixty countries around the world.

The VIZAS plant also produces woodworking equipment.

BDS-4 combined woodworking machine. Purpose, scope

The semi-industrial 3-operational combined woodworking machine BDS-4 is designed for complex processing of parts from various types of wood.

The BDS-4 machine has a simple design: an electric motor with a two-stage pulley and a planer shaft (spindle) with a receiving pulley are connected by a V-belt. The planing shaft (spindle) has two rotation speeds - 2400 and 4000 rpm when the V-belt is shifted.

At the end of the cutterhead, a take-up pulley and a circular saw (disc cutter) are attached.

The machine performs the following operations:

Planing (planing) along a plane up to 200 mm in width and up to 3 mm in depth in one pass at a workpiece feed rate of up to 2 m/min. Speed of rotation of a knife shaft - 4000 rpm;
Planing along the ribs (edge) at an angle from 0 to 45 °;
Sawing along and across the fibers of boards up to 50 mm thick at a billet feed rate of up to 1.0 m/min. Circular saw rotation speed 2400 rpm;
Milling disc cutter up to 16 mm deep at a billet feed rate of up to 2 m/min;
Tool sharpening with a grinding wheel.

The composition of the combined machine BDS-4

The machine consists of a frame on which the main shaft (spindle) is installed in rolling bearings, which is a knife shaft.

A pulley is cantilevered on the shaft, to which rotation is transmitted from the electric motor through a V-belt drive. Electric motor pulley - two-stage, provides two speeds of rotation 2400 and 4000 rpm. The spindle speed is selected by moving the V-belt on the motor pulley. A speed of 2400 rpm is better for working with a circular saw, a speed of 4000 rpm is suitable for planing.

Planing tables with a knife shaft guard and a saw table are installed on the frame. The tables are height adjustable.

BDS-4 General view of the combined machine

Support legs of the machine
bed
Cutter shaft bearing
Reception planer table
Thrust bar
electric motor
Electrical cabinet
Circular saw protection
Infeed planer table height adjustment knob
Intake planer table height adjustment knob
Network switch 220 V
Start button
Stop button
Planer position clamp screws

Preparatory operations

Bar for calibrating knives in the planing drum of the BDS-4 machine

The knives must be installed so that they protrude 1 mm beyond the dimensions of the knife shaft. When installing, check the uniform exposure of the knives along the entire length of the shaft.

Start tightening the bolts holding the knives from the middle of the wedge, and adjust the knives according to the gauge bar. Before starting work, be sure to check the reliability of the fastening of the knives. After turning on the planer, make sure that it is working properly. It is necessary to monitor the operation of the knife shaft bearings. If the temperature rises, the bearings must be replaced.

Electric equipment of the combined woodworking machine BDS-4

The electrical circuit of the BDS-4 machine for 220 V

Woodworking machine BDS-4. Video

Technical characteristics of the combined machine BDS-4

Parameter name	BDS-4	BDS-5	VZ-335
Sawing with a circular saw
Cutting depth range, mm	50	50	80
The largest diameter of the saw blade, mm	Ø250	Ø250	Ø250..Ø315
Landing diameter of a saw, mm			32, 50
Saw speed, rpm	2400, 4000	3000, 4500	3000, 4500
Dimensions of the working surface of the saw table, mm
End carriage dimensions, mm
End carriage stroke, mm				The largest diameter of the cutter, mm	180	180		The greatest depth of milling, mm	16	16
Jointing (planing)
Maximum jointing (planing) width, mm	200	200	250
The greatest depth of the removed layer in one pass when planing, mm	3	3	3
Diameter of the cutting part of the knife shaft, mm
The frequency of rotation of the knife shaft on Idling, rpm	2400, 4000	3000, 3900	3000, 4500
Planing knife dimensions, mm
Number of planer knives in the knife drum	2	2
Width of planing tables, mm
Total length of planing tables, mm		1300
Reismus
The maximum and minimum thickness of the workpiece during thicknessing (height of the thicknessing table), mm	No	No	120
The smallest length of the processed workpiece during thicknessing, mm	No	No	400
Billet feed rate in thickness gauge mode, m/min	No	No	3,6; 5
Dimensions of the working surface of the thicknessing table, mm	No	No
Maximum planing width, mm	No	No
The greatest thickness of the cut layer during thicknessing, mm	No	No	3
drilling. Milling with an end mill
The largest diameter of the drill, cutter, mm	No	No	3..20
Rotation frequency of the drill, cutter, min	No	No	3000, 4500
Dimensions of the working surface of the table, mm	No	No	450 x 250
Drilling depth, mm	No	No	150
Longitudinal travel of the table, mm	No	No	150
Turning device
Turning spindle speed, rpm	No	1300	1600	The greatest length of the workpiece during turning, mm	No	630	800	The largest diameter of the workpiece when turning in the centers, mm	No	100	80	The largest diameter of the workpiece when turning on the plan washer, mm	No	200	300	Lathe weight, kg	No	26
Electrical equipment of the machine
Type of supply current	~220V	~220V / ~380V	~380V
Number of electric motors on the machine, pcs	1	1	1
Electric motor, kW	2,2	1,5/ 2,2	3
Dimensions and weight of the machine
Machine dimensions (length x width x height), mm	1035 x 560 x 1280	825 x 580 x 1000	1100 x 900 x 900
Machine weight, kg	140	125	250